Pics of it installed on my 3.0 2000 nissan maxima.
Note I am only using 3 or 4 mounting bolts because while taking off my old rusted bolts one of them snapped. I will drill it out later. I strongly suggest letting those 4 bolts soak in wd40 or some penetrating lube for a night.
On the other hand, install was very straight forward. I was amazed how effectively I was able to pull or push the motor back by tightening or loosening the tension. I just put a little bit of tension one it (pushing the motor back a little bit) and left it like that. This product plus traction bars and some nice slicks should be a nice setup.
