|
Check all of the sensors, make sure they aren't covered in debris and/or crap (whether literal or not).
There are a number of fuses that indirectly power the ABS system, but you can just remove the two under the fusebox on the left side of the hood. Marked 'ABS SOL' and 'ABS MTR'. You could also just unplug the ABS actuator, same effect.
And of course as you said, pull the codes. FWIW if the light is on, the ABS is disabled already; no reason in pulling fuses.
__________________
Quote:
Originally Posted by 2damax
This jerk is right so often I just search threads hoping he gets something wrong so I can catch him
|
Quote:
Originally Posted by kizzmyazz
ok so what i found out is that because of the FMU, i dont need to get injectors because it will neutralize the oil pressure to prevent detotnation
|
FSMs | A32 CEL Decoder | Howto Videos
|