Thread: CEL codes
View Single Post
Old 07-02-2009, 07:03 PM   #8
Shift_Nismo
Senior Member
 
Join Date: May 2009
Location: Atl,Ga
iTrader: (2)
Posts: 123
Well i did drive the car, and cleared the codes, and those are the codes that got set. This was all about a day or 2 after i got it fixed. The light stayed off while it was on, but when i turned it off, and turned it back on, the light came back. And i think i changed out the EGRC solenoid valve. I got the part from Dave B., and he said it was the right part. I also looked in the FSM, and from what i can tell, the EGRC solenoid, and the MAP/BORO solenoid look exactly alike. If anyone has pictures of both of these, please post them, so i can see the difference. I know it has 2 nozzles where the vacuum lines are supposed to go. And on the invoice it says something to the effect of solenoid valve assembly, but idk exactly, and cant remember the part number. Im not at home, but still have the invoice so when i get back, ill post the part number, maybe then someone will no if i got the right part or not.

Last edited by Shift_Nismo; 07-02-2009 at 07:31 PM.
Shift_Nismo is offline   Reply With Quote