Maxima Forums - View Single Post - Necessary to replace mounts same time as struts?

fflint_18 · 07-02-2009, 06:36 PM

Go for Moog mounts. Better than OEM and who knows what you might get on EBay.

I think the Part Numbers are the same for all 5th Gens. These are the Part Numbers for a 2003.

Fronts are Part Number K90655 and includes the bearing

Rears are Part Number K90299

They also have Strut Bellows which includes the bumper

Front K90463

Rear K90467

You might want to check on the sway bar links also. While you have everything else off. That's where I was getting a lot of my noise from

The Moog's are thicker and have grease fitting compared to stock

Part Numbers are

K90432 for the left

and

K90431 for the right

After that the only other thing on the front for suspension is the balljoints

Hope this helps.

07-02-2009, 06:36 PM	#11
fflint_18 Senior Member 2002 Maxima SE 6MT Join Date: Dec 2008 Location: South Jersey (Near Philly) iTrader: (0) Posts: 425	Go for Moog mounts. Better than OEM and who knows what you might get on EBay. I think the Part Numbers are the same for all 5th Gens. These are the Part Numbers for a 2003. Fronts are Part Number K90655 and includes the bearing Rears are Part Number K90299 They also have Strut Bellows which includes the bumper Front K90463 Rear K90467 You might want to check on the sway bar links also. While you have everything else off. That's where I was getting a lot of my noise from The Moog's are thicker and have grease fitting compared to stock Part Numbers are K90432 for the left and K90431 for the right After that the only other thing on the front for suspension is the balljoints Hope this helps.