Maxima Forums - View Single Post - Kevlo RMT Turbo build - Re-do/new turbo soon

**Kevlo911** · 06-22-2009, 05:18 PM

UPDATE
I bought Eddy's old kit. I will make a new parts list of what I have and what I need. I will keep the old file up for anyone thinking of doing it. Will have more info later

-----------------------------

The only thing I have ordered is the turbo. It will be here tomorrow and I will have pics later on. Since winning the turbo(Holset HX35) I have been reading on boosting my car. I have made an excel file on what all I need and how I want to do things. I figured I would share this with everyone, not only to get new ideas but to help others incase they are doing the same.

http://spreadsheets.google.com/ccc?k...8oVIpYmqxsz-PA

That is the excel file I have right now, I will continuously update it.

For the exhaust, i THINK I need just a 3" V-Band flange but I also see this on ebay:
http://cgi.ebay.com/ebaymotors/Holse...5%7C240%3A1318

Keep this in mind when reading that excel sheet, I am ONLY planning to run 4-5 PSI for NOW. In the future I will go higher.

Fuel:
For now I do believe my stock fuel setup of the 290cc injectors will be enough to handle the 4-5psi of boost. If not, the 315-320cc's I will get from upping the PSI to 50(by adding the afpr of course) should be sufficient. For people that dont know, the DE-K injectors are the same as the 350z injectors accept the fact that the Z is at 50psi and the DE-K is around 41-45psi.

Air:
I plan to get an amsoil filter as soon as I figure out how everything will be mounted.

Tuning:
I already have an Emanage Ultimate with a wideband so I do not need anything else.

Clutch:
Also in the future I will upgrade the clutch, but the AE Nissan/Exedy clutch with the 2k3 Altima pressure plate should be fine with the 4-5 psi according to people I have spoken with.

Future:
Intercooler, meth injection, clutch, up the boost, electronic boost controller, afpr, ect...

Any comments/parts I need is welcome.

Pics:
to come

And a special thanks to streetz for helping me out

06-22-2009, 05:18 PM	#1
Kevlo911 You can't friend yourself Join Date: Dec 2000 Location: DeFuniak and Gainesville, FL iTrader: (33) Posts: 16,456	Kevlo RMT Turbo build - Re-do/new turbo soon UPDATE I bought Eddy's old kit. I will make a new parts list of what I have and what I need. I will keep the old file up for anyone thinking of doing it. Will have more info later ----------------------------- The only thing I have ordered is the turbo. It will be here tomorrow and I will have pics later on. Since winning the turbo(Holset HX35) I have been reading on boosting my car. I have made an excel file on what all I need and how I want to do things. I figured I would share this with everyone, not only to get new ideas but to help others incase they are doing the same. http://spreadsheets.google.com/ccc?k...8oVIpYmqxsz-PA That is the excel file I have right now, I will continuously update it. For the exhaust, i THINK I need just a 3" V-Band flange but I also see this on ebay: http://cgi.ebay.com/ebaymotors/Holse...5%7C240%3A1318 Keep this in mind when reading that excel sheet, I am ONLY planning to run 4-5 PSI for NOW. In the future I will go higher. Fuel: For now I do believe my stock fuel setup of the 290cc injectors will be enough to handle the 4-5psi of boost. If not, the 315-320cc's I will get from upping the PSI to 50(by adding the afpr of course) should be sufficient. For people that dont know, the DE-K injectors are the same as the 350z injectors accept the fact that the Z is at 50psi and the DE-K is around 41-45psi. Air: I plan to get an amsoil filter as soon as I figure out how everything will be mounted. Tuning: I already have an Emanage Ultimate with a wideband so I do not need anything else. Clutch: Also in the future I will upgrade the clutch, but the AE Nissan/Exedy clutch with the 2k3 Altima pressure plate should be fine with the 4-5 psi according to people I have spoken with. Future: Intercooler, meth injection, clutch, up the boost, electronic boost controller, afpr, ect... Any comments/parts I need is welcome. Pics: to come And a special thanks to streetz for helping me out __________________ 97 Pearl White Max GLE I has car LED tails for sale for 97-99 as well: http://forums.maxima.org/4th-generat...-interest.html Last edited by Kevlo911; 06-29-2009 at 12:58 PM.