|
it's easy take the manifold off, remove the vias and elbow. take a saw and make 2 straight cuts in the elbow opening, 1 angle cut in the corner and 1 long cut in the vias opening.
get a dremel with a cutoff wheel and sanding drum and finish it off, all done
__________________
My Cardomain _  _ Maxima runs 13.4@109
Dyno: ? whp & ? wtq
Nitrous PB: 13.4@110mph
All Motor PB: 14.0@99mph
3280lb with driver, full trim, rims, spare, jack, fluids, etc & notorized proof
|