lowpro19s

Is there a part number or a replacement part for this foam piece?? I cleaned my engine and saw that it was deteriorating and falling apart. Its the foam around the front of the stock intake piece..let me know.

nysmaxima

replaced mine with 3/4"wide x 7/16"thick self stick, rubber foam weatherseal from a home depot type store...removed old one, cleaned surface with adhesive remover and then alcohol, installed new one...
works great...

Hilbe

iTrader: (3)

If you have a CAI, you don't really need the whole snorkel. Take it off, I did.

Most people who do replace the foam use some form of weather stripping found at your local hardware store.

hmr1979

good post
im going to do this, mine looks like crap also

eK9aT10pSi

iTrader: (1)

heres a good diy from the other org
http://www.6thgenmaxima.org/forums/viewtopic.php?t=1235

saraara

Yeah this problem applys to almost all 6th gen maxima I guess.

I also bought weatherseal from home depot and looking forward to clean and apply some time.

http://www.homedepot.com/webapp/wcs/...ctId=100174607

http://www.homedepot.com/webapp/wcs/...ctId=100205904

Apollos2

iTrader: (16)

Word!! and here is another that can go along with it.

http://www.6thgenmaxima.org/forums/viewtopic.php?t=1077