Chermax Phase 2 begins...
10-29-2007, 07:16 PM
#1
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Chermax Phase 2 begins...
OK, started phase II. First I installed the Front Endlinks, wow with the D2 coilovers, and all the other suspension upgrades this car handles and feels awesome compared to my stock days. I'm just thankful for the smooth roads in my area that really let me enjoy this setup.
OK now for the first problem. The downpipe that holds the wastegate and MAF sensor were made with a 2002 Alti MAF attachment that does not fit the 6th Gen Max MAF. The fix, since the downpipe is made of Aluminum like my Fujita CAI, I sacrificed it for the sake of moving the project forward. We have another custom fab shop that will swap them out for us tomorrow, see the difference, sorry Fujita. As a matter of fact, not only did the holes not line up but you couldn't even insert that MAF into the down pipe...
The next 3 pictures are the 440CC injectors installed, all injectors had to be spliced into the existing wires, and the last picture is where the battery use to be and it shows the slack on the cable that is needed to relocate the fuse box.
OK now for the first problem. The downpipe that holds the wastegate and MAF sensor were made with a 2002 Alti MAF attachment that does not fit the 6th Gen Max MAF. The fix, since the downpipe is made of Aluminum like my Fujita CAI, I sacrificed it for the sake of moving the project forward. We have another custom fab shop that will swap them out for us tomorrow, see the difference, sorry Fujita. As a matter of fact, not only did the holes not line up but you couldn't even insert that MAF into the down pipe...
The next 3 pictures are the 440CC injectors installed, all injectors had to be spliced into the existing wires, and the last picture is where the battery use to be and it shows the slack on the cable that is needed to relocate the fuse box.
10-29-2007, 07:26 PM
#3
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
OK, the rest are a series of pictures which the intercooler and piping being fitted and custom fabbed, everything is loose fitted intill all final cuts and welds, you can also se the hotshot headers before and after cut and fabbing...
that piping looks VERY low, and VERY close to everything else...any plans for heat wrapping, or w/e it's called?
10-29-2007, 08:14 PM
#10
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
10-29-2007, 08:15 PM
#11
10-29-2007, 09:03 PM
#18
aka The Doom Ship
Join Date: May 2004
Location: DFW, TX
Posts: 1,788
10-29-2007, 09:34 PM
#19
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
I have hotshot headers and the Alti did not, he had his OEM y-pipe custom fabbed, this is not a 100% bolt up kit, custom fabbing will still be required for all installs at this time. Please remember this is the NUMBER 1 6th Gen, I'm provideing the feedback to SFR so follow on members will have it easier than I...
10-29-2007, 10:27 PM
#20
Chern, this is fabulous. The pics are great, and the work so far is outstanding. I appreciate you being THE pioneer for turbocharging the Maxima. This is a huge step. I look forward to more pics tomorrow. After tomorrow, Ill be at SEMA in Vegas and I wont be back home until Thursday night. Is the project going on schedule?
10-30-2007, 03:41 AM
#21
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Chern, this is fabulous. The pics are great, and the work so far is outstanding. I appreciate you being THE pioneer for turbocharging the Maxima. This is a huge step. I look forward to more pics tomorrow. After tomorrow, Ill be at SEMA in Vegas and I wont be back home until Thursday night. Is the project going on schedule?
10-30-2007, 05:01 AM
#24
So Chern am I right in saying that SFR will no work on a new down pipe that will be for our cars so that we will not have to fab our CAI. By the way that looks awesome. I need to find someone local who can do this job for me ASAP.
10-30-2007, 05:26 AM
#26
Spared no expense. Question...will you call your insurance company and tell them about the custom mods as if you hit a deer or anything else god for bid, its not like, you will have to explain where this majestic intercooler appeared? Just a thought and Im sure you already have this under control. Cant wait for the final project. itsa naice
10-30-2007, 05:32 AM
#27
amaziin
i really want to see how this project goes for you cause def im interested now especially since before i didn't think you could do turbo in a auto. i feel weird for sayin that but i didn't know. can't wait till i hear more
10-30-2007, 07:21 AM
#28
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Link:
http://www.speedforceracing.com/prod...aximaturbo.php
10-30-2007, 07:27 AM
#29
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Spared no expense. Question...will you call your insurance company and tell them about the custom mods as if you hit a deer or anything else god for bid, its not like, you will have to explain where this majestic intercooler appeared? Just a thought and Im sure you already have this under control. Cant wait for the final project. itsa naice
10-30-2007, 07:32 AM
#31
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
10-30-2007, 07:54 AM
#32
10-30-2007, 08:02 AM
#33
10-30-2007, 08:17 AM
#36
aka The Doom Ship
Join Date: May 2004
Location: DFW, TX
Posts: 1,788
I already showed you what my idea was; don't act you haven't seen this photo before. Don't think I haven't noticed you tryin to call me out on a couple of threads. This to me is a much cleaner setup. I'm in no way knockin' Chern; I tip my hat off; do it the way you feel best. I just feel like this setup would have been cleaner:
10-30-2007, 08:32 AM
#37
I already showed you what my idea was; don't act you haven't seen this photo before. Don't think I haven't noticed you tryin to call me out on a couple of threads. This to me is a much cleaner setup. I'm in no way knockin' Chern; I tip my hat off; do it the way you feel best. I just feel like this setup would have been cleaner:
Point: Unless you could actively say that set-up would fit your car, I'm not sure I would say X set-up > Y set-up. (As you did in so many words, the phrase I would have done it differently)
10-30-2007, 08:40 AM
#38
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
I already showed you what my idea was; don't act you haven't seen this photo before. Don't think I haven't noticed you tryin to call me out on a couple of threads. This to me is a much cleaner setup. I'm in no way knockin' Chern; I tip my hat off; do it the way you feel best. I just feel like this setup would have been cleaner:
Last edited by chernmax; 10-30-2007 at 09:00 AM.
10-30-2007, 08:57 AM
#39
Details:
Cliffs:
I'm in no way calling you out, just trying to gather further information from you. If you think I'm calling you out, then why not just answer my questions and call it good, so therefore I don't have to 'call you out' (AKA, ask for further clarification).
Originally Posted by Me
Anything looks good in the air with no car attached to it.
Originally Posted by AllBlackMax
Don't think I haven't noticed you tryin to call me out on a couple of threads