Chermax Phase 2 begins...
#243
Thanks Mack, anyone who knows me knows I don't roll dirty. We need to get the work done first before I make your eyes misty with beauty. Last, here is the YouTube VIDs of the VERY first key turn with the Turbo, then a short follow on VID with a little juice!!!
http://www.youtube.com/watch?v=MWH0IezLh_M
http://www.youtube.com/watch?v=s8USgMbnC5U
http://www.youtube.com/watch?v=MWH0IezLh_M
http://www.youtube.com/watch?v=s8USgMbnC5U
so when will she be done and ready to try it on the road?
#251
#256
Thanks Mack, anyone who knows me knows I don't roll dirty. We need to get the work done first before I make your eyes misty with beauty. Last, here is the YouTube VIDs of the VERY first key turn with the Turbo, then a short follow on VID with a little juice!!!
http://www.youtube.com/watch?v=MWH0IezLh_M
http://www.youtube.com/watch?v=s8USgMbnC5U
http://www.youtube.com/watch?v=MWH0IezLh_M
http://www.youtube.com/watch?v=s8USgMbnC5U
Last edited by Mack; 11-07-2007 at 12:53 PM.
#257
Sounds healthy. Is the idle rough or is that just vid quality? This is really exciting stuff; what a breakthrough for 6th Gen Maximas. This may very well put us on the map with aftermarket tuners. Any vids of it on the road today Chern?
#258
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Still lots to do to tweak her in right...
Sorry no VID on the way home, dark out too early now...
#263
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
OK, had some light in the garage so I did a little cleaning, reinstalling, dressing, braiding and for those who asked, more pictures at different angles.
I also made a place in my engine bay for not only sponsors but for some key shops/people who continue to help the 6th gen max achieve performance so I'm giving something back!!!
And this is an idea of what most rides can expect to see in their rear view mirrors, I'm temped to stencil the intercooler with E V O M which when they look in their rear view mirror it says M O V E ... Oh and IMO, the RLM bumper looks better shaved 1"
I also made a place in my engine bay for not only sponsors but for some key shops/people who continue to help the 6th gen max achieve performance so I'm giving something back!!!
And this is an idea of what most rides can expect to see in their rear view mirrors, I'm temped to stencil the intercooler with E V O M which when they look in their rear view mirror it says M O V E ... Oh and IMO, the RLM bumper looks better shaved 1"
Last edited by chernmax; 11-07-2007 at 05:59 PM.
#266
And the NWP decal looks great in your engine bay next to that turbo!
#273
looks like a very nice setup you have there. I'm surprised I didn't see this thread earlier. I look forward to seeing some track times with the built tranny. Got any plans for building the motor later for more boost?
#276
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Once I install the wide band monitor (Mid Nov) maybe you guys can tune the car for me, I have all base settings and only running 6 psi of boost to break the turbo in right, also running Royal Purple racing oil through the turbo lines...
#278
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
OK, couple more pic's of the GReddy ProFec B Spec-II installed under the drivers side dash and of course after I get my car out the shop, this arrives the AEM UEGO Wide Band Monitor Gauge. I'll have it installed at the same time as the rear Wilwood BBK so I can have a little fun driving and breaking in the Turbo...
#280
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
I plan on putting it back, I already know how, just a little low on the list right now because with all the stuff I'm doing I would have to continually remove it anyway so it doesn't get damaged, when everything is right and all PAWS off her, I'll put the cherry back on the cake...