thanks for everything guys. i finished all the wiring today, all thats left is to mount the bottle, fasten the nozzle in the mid pipe, and do the plugs. i ran the WOT ****ch into the car instead of mounting it on the throttle body, i think i would just rather have it in my hand for some reason...i wired up everything and tested it and it activated the solenoids.
the bottle i think im just going to weld in the brackets. i dont really want to drill, but i saw two bolts sticking up through that i might use, i think they are for the heat shield over the muffler. i still have to find a jam nut for the nozzle. i went to home depot but they didnt have a 7/16 fine thread jam nut, im gonna have to find something somewhere.
i think the plugs are NGK PFR5G-11 (platinum), with a 0.043 in. gap. i am going to run a 50 shot right away and maybe going up to a 75 max later on. would i be alright to just get the normal plugs or would one step colder be better? should i get copper? what about the gap? any suggestions or advice you guys can give me is very much appreciated.
