Maxima Forums - View Single Post

**Puppetmaster** · 02-18-2009, 06:38 AM

IIRC, it'll just be similar to the Emanage Ultimate... basic ones would be:

Injector signal (for all cylinders)
Ignition signal (for all cylinders)
MAF
TPS
Knock
Power (probably ECM power)
Ground (probably ECM ground)

I'm sure there are more.... I'll see if I can find a good thread.

And because the UTEC is set up for a 350Z/G35 type ECM harness, you'll need to do some remapping using the Z33 wiring diagrams.

PM SurraTT, I know he's worked on this before.

02-18-2009, 06:38 AM	#2
Puppetmaster Super Moderator 2002 Maxima Join Date: Apr 2004 Location: Fairfax, VA iTrader: (41) Posts: 16,012	IIRC, it'll just be similar to the Emanage Ultimate... basic ones would be: Injector signal (for all cylinders) Ignition signal (for all cylinders) MAF TPS Knock Power (probably ECM power) Ground (probably ECM ground) I'm sure there are more.... I'll see if I can find a good thread. And because the UTEC is set up for a 350Z/G35 type ECM harness, you'll need to do some remapping using the Z33 wiring diagrams. PM SurraTT, I know he's worked on this before. Last edited by Puppetmaster; 02-18-2009 at 06:40 AM.