Maxima Forums - View Single Post

*Broaner* · 01-05-2009, 07:43 PM

After a long hiatus from the VQ Powered S13 world I've decided to go ahead w/ the LS1 swap. So its time to put this powertrain up 4 sale. Its been a long hard road to come to the conclusion that the VQ is not for me. I need more power because I'm a freak of nature. This exact motor package as it is put down the following dyno. The lack of peak power is due to the fact that its breathing through the A32 upper and lower manifold. The A32 IM is very restrictive up top for even the VQ30. With the correct IM this VQ35 would put down somewhere in the 230wheel range with minimal tuning. I have the correct top feed injectors to complete the setup but not the TB or actual IM.

Z33 6Spd Tranny w/ less than 30k(Bought from yard for $800)
A32 ECU and Modified Harness
A32 Slightly Lightened Flywheel
Polished VQ30 Timing Chain Cover.
ACT Stage I Clutch(Less than 5K on)
TOB Spacer to adapt Z33 TOB to A
Hybrid VQ35DE Swap(VQ35 Longblock with VQ30 Timing Chain system)
Unorthodox Racing Underdrive Pulley.
Custom 2" True Dual header dump pipes with Magnaflow 2" flowthrough mufflers.
No Power Steering or A/C
350Z Exhaust Manifolds Modified to clear steering shaft.
Custom One Piece Steel Driveshaft
Custom Motor and Tranny Mounts
APS Extra Capacity Oil Pan($400+)
B&M STS
Nismo Titanium Shiftknob
This setup will bolt in but will require modification of the sway bar mount and the shifter hole. The package is not entirely buttoned up and will need some creativity but it is certainly an good assemblance of parts. Asking $2500. Will deliver within 300 miles of Madison, WI. Will deliver further for $.46/mile.

Please contact broan@wisc.edu with questions, concerns or inquiries.

01-05-2009, 07:43 PM	#1
Broaner 2060lbs and falling... S13 Join Date: Jan 2003 iTrader: (10) Posts: 5,135	VQ35 Hybrid Powertrain After a long hiatus from the VQ Powered S13 world I've decided to go ahead w/ the LS1 swap. So its time to put this powertrain up 4 sale. Its been a long hard road to come to the conclusion that the VQ is not for me. I need more power because I'm a freak of nature. This exact motor package as it is put down the following dyno. The lack of peak power is due to the fact that its breathing through the A32 upper and lower manifold. The A32 IM is very restrictive up top for even the VQ30. With the correct IM this VQ35 would put down somewhere in the 230wheel range with minimal tuning. I have the correct top feed injectors to complete the setup but not the TB or actual IM. Z33 6Spd Tranny w/ less than 30k(Bought from yard for $800) A32 ECU and Modified Harness A32 Slightly Lightened Flywheel Polished VQ30 Timing Chain Cover. ACT Stage I Clutch(Less than 5K on) TOB Spacer to adapt Z33 TOB to A Hybrid VQ35DE Swap(VQ35 Longblock with VQ30 Timing Chain system) Unorthodox Racing Underdrive Pulley. Custom 2" True Dual header dump pipes with Magnaflow 2" flowthrough mufflers. No Power Steering or A/C 350Z Exhaust Manifolds Modified to clear steering shaft. Custom One Piece Steel Driveshaft Custom Motor and Tranny Mounts APS Extra Capacity Oil Pan($400+) B&M STS Nismo Titanium Shiftknob This setup will bolt in but will require modification of the sway bar mount and the shifter hole. The package is not entirely buttoned up and will need some creativity but it is certainly an good assemblance of parts. Asking $2500. Will deliver within 300 miles of Madison, WI. Will deliver further for $.46/mile. Please contact broan@wisc.edu with questions, concerns or inquiries. __________________ VQ Powered S13 Coupe Video Compilation of the first VQ Powered S13 Cale "IWNTMOREHP" - "Broan takes drivin back to the old school...dirt all over his face with sunglass ring marks were they kept the dirt from stickin and gloves to protect his hands! What a crazy bastard!" Last edited by Broaner; 04-12-2009 at 07:59 PM.