Quote:
Originally Posted by ohitzme
Thanks its federal specs
|
I have a 2000 SE with 90K miles and I just replaced this O2 sensor. There is a TSB for it here:
http://maxima.theowensfamily.com/tsb/NTB02-051a.pdf
It is not too hard to replace, it is right in the middle so I jacked up the front end and crawled in from the driver's side. Mine was in tight and the exhaust system had too much flexibility to get a good torque on it so I had someone hold a long 2x2 against the bracket to provide some resistance while I reefed on it.
It helps to have an O2 socket so you can put an end wrench on the socket and get some extra leverage. I couldn't get a good bite with just an end wrench on the sensor.
The code has not come back so far. Hope that helps.