Maxima Forums - View Single Post

vernk · 12-12-2008, 01:09 PM

well it's hard to say with out hearing it myself but I would say go though and make sure the plugs are gaped right and that the plugs, wires, cap and rotor are all in good shape then go though all the vac lines to make sure they are not cracked and such, make sure all plugs are together and clean. Then the funnest part if you have a chance disconnect the exhaust before the cat and see how it runs, your cat could be plugged.

12-12-2008, 01:09 PM	#36
vernk Senior Member 85 SE Join Date: Apr 2007 Location: Albuquerque, NM iTrader: (0) Posts: 630	well it's hard to say with out hearing it myself but I would say go though and make sure the plugs are gaped right and that the plugs, wires, cap and rotor are all in good shape then go though all the vac lines to make sure they are not cracked and such, make sure all plugs are together and clean. Then the funnest part if you have a chance disconnect the exhaust before the cat and see how it runs, your cat could be plugged. __________________ Butthurtness at it's best, is when someone's feelings get hurt over something said on an internet message board and they type in big letters.