Quote:
Originally Posted by Cdg2125
yea i know what the pwm is for. But i meant with leds you usually use the pwm to control the brightness when you have them running lower for parking lights, so a brake wire will make the leds brighter. By the running lights I meant that they are only signal purpose. They don't change brightness or anything. They are on or off. I just meant that resistors would be easier than wiring up the pwm. I agree hands on is better. Just finished wiring a sequential signal circuit for new led tails and building was much more helpful then starring at schematics.
|
I have them wired to my acc, so they are constantly on, but once in a blue moon I don't want them on or want them dim for some odd reasons, I can do that with the PWM.
By the way I'm still trying to figure out the LED brake light thing. How to wire the running lights with the brake lights. I'm going to be using the PWM to wire the running lights, but to wire the brake lights to that....big question mark.