[JtzMax]

Originally Posted by DenverMax99

look at your hub! it is very much so possible to warp your hub which would also cause a vibration and shudder. if that is the case expect to replace your wheel bearings again soon! warped hub would be caused by someone trying to remove the main axle nut without air tools and having to pry against the lugs to counteract axle nut rotation... just a thought! also... my more realistic guess is that if your mt... you probably warped your flywheel. with a warped flywheel your car will shudder like crazy at low speeds/gears where you have enough torque for the clutch to slip on a warped flywheel. i am currently experiencing the warped flywheel problem and your description of your problem sounds very similar. i would almost bet money that its your flywheel and not a motor mount. my motor mounts made a loud thud sound when they went out and it would happen under acceleration and decceleration. with the flywheel it would make sense that you only notice it at low speeds/gears because you prob don't have the horsepower or torque to slip the clutch in anything past 2nd or 3rd gear.

First off ... welcome to the .Org mate.

Now with that out of the way, WTF are you gabbing on about? You don't seem to understand what you are talking about here. A clutch / flywheel issue is not even the topic here - so as much as you want to go on about that, it's pointless. As far as you thinking it's a hub - since when can you warp the hub so much it would cause vibration? I could see a bad wheel bearing (but that is not what the OP was asking / talking about) making noise, but not causing vibration. Not to mention that a bad wheel bearing makes a growling sound to top it all off. Perhaps you should just read more and not post just yet.