Maxima Forums - View Single Post

darklegend06 · 10-02-2008, 01:20 AM

well here are some more picture of how everything is coming along.
The corners are done, but are not wired up to everything. The picture was taken with the wires just going straight to the battery.

Also the difference in between my first prototype for the head lights and prototype numero dos for my head lights.

As you can see the one on the bottom of the picture is the 1st prototype and the one towards the top is my second one. The second one is smaller, but both contact bars are on top making it thinner as well.
The first on was alright, but it was thick because I had positive contact wire on top of the board and one negative contact wire on the bottom.

Also notice the notch I had to cut out on the second prototype, because the 4th gen headlights have a stupid plastic part that sticks out on the outer edges.

Feel free to comment.

10-02-2008, 01:20 AM	#43
darklegend06 Senior Member 97 Maxima Join Date: Nov 2004 Location: Streamwood IL iTrader: (11) Posts: 1,287	well here are some more picture of how everything is coming along. The corners are done, but are not wired up to everything. The picture was taken with the wires just going straight to the battery. Also the difference in between my first prototype for the head lights and prototype numero dos for my head lights. As you can see the one on the bottom of the picture is the 1st prototype and the one towards the top is my second one. The second one is smaller, but both contact bars are on top making it thinner as well. The first on was alright, but it was thick because I had positive contact wire on top of the board and one negative contact wire on the bottom. Also notice the notch I had to cut out on the second prototype, because the 4th gen headlights have a stupid plastic part that sticks out on the outer edges. Feel free to comment. Last edited by darklegend06; 10-02-2008 at 01:25 AM.