Maxima Forums

All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.

ECU Pinout cheat-sheets (large images, 1000+px wide)

   
Old 08-26-2008, 06:22 PM
  #1  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
ECU Pinout cheat-sheets (large images, 1000+px wide)
Some ECU pinout cheat sheets, if anyone's interested. All images are linked to the full-size versions.

I keep a few of these around (the A32 and Z33, both DE and HR) laminated in my box for doing EMS installs and the like. They're very useful laminated, as you can make notes and mark off spots with sharpie, then just spray it down with brake parts cleaner and comes out looking like new.

Didn't even bother with the '99, since I only have the FSM and no concrete pinout details.

If anyone has a pinout for the VG and VE J30s, I'll make up one for those as well.

Red is power, black is ground...
Last edited by pmohr; 07-08-2009 at 01:06 PM.
pmohr is offline  
Reply
Old 08-26-2008, 06:25 PM
  #2  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331



350z/G35:



'07+ 350z/'07+ G35 sedan/G37 (likely 370z as well, but not sure)
Last edited by pmohr; 06-13-2009 at 05:06 PM.
pmohr is offline  
Reply
Old 08-27-2008, 07:41 AM
  #3  
'Trynna' is not a word
iTrader: (19)
 
mtrai760's Avatar
 
Join Date: Mar 2001
Location: Seattle Area, WA
Posts: 7,081
Very nice. Stuck for usefulness!
mtrai760 is offline  
Reply
Old 08-27-2008, 05:50 PM
  #4  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Altimas:
Last edited by pmohr; 06-13-2009 at 04:49 PM.
pmohr is offline  
Reply
Old 08-27-2008, 08:17 PM
  #5  
Senior Member
iTrader: (10)
 
tlrmax's Avatar
 
Join Date: Sep 2003
Location: El Paso, TX
Posts: 419
Do you have it for a 99max?
tlrmax is offline  
Reply
Old 08-27-2008, 08:33 PM
  #6  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by tlrmax
Do you have it for a 99max?
No, since the ECU pinout in the FSM is incorrect, unless someone cares to give me a link to a known correct pinout.
pmohr is offline  
Reply
Old 08-27-2008, 08:36 PM
  #7  
Senior Member
iTrader: (10)
 
tlrmax's Avatar
 
Join Date: Sep 2003
Location: El Paso, TX
Posts: 419
oh ok. I am gathering all my info b4 I install my mevi. I was wanting to know which is the rpm ecu pin for my 99.
tlrmax is offline  
Reply
Old 08-27-2008, 08:38 PM
  #8  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by tlrmax
oh ok. I am gathering all my info b4 I install my mevi. I was wanting to know which is the rpm ecu pin for my 99.
Should be pin 5, like the rest of the A32s. W/G, IIRC.
pmohr is offline  
Reply
Old 08-27-2008, 08:39 PM
  #9  
Senior Member
iTrader: (10)
 
tlrmax's Avatar
 
Join Date: Sep 2003
Location: El Paso, TX
Posts: 419
Originally Posted by pmohr
Should be pin 5, like the rest of the A32s. W/G, IIRC.
Thats what I figured but my 99 shares many things with the 2000. Thats why I was curious.
tlrmax is offline  
Reply
Old 08-27-2008, 08:44 PM
  #10  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by tlrmax
Thats what I figured but my 99 shares many things with the 2000. Thats why I was curious.
As long as it has an A32 ECU and matching harness connector, it should be pin 5.
pmohr is offline  
Reply
Old 09-14-2008, 03:13 AM
  #11  
Newbie - Just Registered
 
cow88's Avatar
 
Join Date: Sep 2008
Posts: 2
hi can u please tell me whether 06 nissan maxima j31 ecu pinout will be same with Z33de.
also where is the ecu located
thankyou
cow88 is offline  
Reply
Old 09-14-2008, 01:29 PM
  #12  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by cow88
hi can u please tell me whether 06 nissan maxima j31 ecu pinout will be same with Z33de.
also where is the ecu located
thankyou
J31? What country do you live in? USDM 6th gen is A34.
pmohr is offline  
Reply
Old 09-17-2008, 08:15 AM
  #13  
Horizontally opposed.
iTrader: (21)
 
mowgli29's Avatar
 
Join Date: Jul 2006
Location: St. Louis, MO
Posts: 1,182
Originally Posted by pmohr
No, since the ECU pinout in the FSM is incorrect, unless someone cares to give me a link to a known correct pinout.
pmohr, have you tried asking the Wiz about this? I mean he did install teh EU on his 99, so maybe he can help. just a thought...
mowgli29 is offline  
Reply
Old 10-28-2008, 10:40 PM
  #14  
Member
iTrader: (1)
 
irax's Avatar
 
Join Date: Apr 2007
Posts: 87
What's KS?

duhhh... knock sensor... i'm an idiot some times
Last edited by irax; 10-29-2008 at 12:03 AM.
irax is offline  
Reply
Old 12-12-2008, 12:10 PM
  #15  
Newbie - Just Registered
 
willie Hutch's Avatar
 
Join Date: Nov 2008
Location: Mississippi
Posts: 6
ECU pinout
Do anyone know where I can find a diagram for an 89 Maxima?
willie Hutch is offline  
Reply
Old 03-11-2009, 01:32 PM
  #16  
Member
 
vgkid's Avatar
 
Join Date: Oct 2008
Location: Dinuba california
Posts: 192
Originally Posted by willie Hutch
Do anyone know where I can find a diagram for an 89 Maxima?

sorry if im late but i have help for you!!

it was a pain trying to look for it when i needed it

go to page 137-140 to look for whet you need. pic of ecu is on 140

http://www.nicoclub.com/FSM/maxima/1994/ec.pdf
vgkid is offline  
Reply
Old 07-08-2009, 11:12 AM
  #17  
Senior Member
iTrader: (11)
 
Maximeltman's Avatar
 
Join Date: Jun 2004
Posts: 2,694
Pmohr...Should the ckps sensor pins for a 1999 se 5mt ECU dated 06/08 be on point with the 95-98 or the 2000?
Maximeltman is offline  
Reply
Old 07-08-2009, 11:35 AM
  #18  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by Maximeltman
Pmohr...Should the ckps sensor pins for a 1999 se 5mt ECU dated 06/08 be on point with the 95-98 or the 2000?
As in the first post:
Originally Posted by pmohr
Didn't even bother with the '99, since I only have the FSM and no concrete pinout details.
No idea. It's not like the 5th gen, it's an A32 style connector; the pins are just swapped around.

And IIRC it's only one of the CKPS', not both that are different.
pmohr is offline  
Reply
Old 07-08-2009, 02:52 PM
  #19  
Senior Member
iTrader: (8)
 
Product_Of_Korea's Avatar
 
Join Date: Nov 2004
Location: BFE, Minnesota
Posts: 2,209
according to dandymax's EU write up its the CKPS(REF). Instead of being pin 44(95-98) It should be pin 46(99).
Product_Of_Korea is offline  
Reply
Old 09-25-2009, 08:36 AM
  #20  
Senior Member
iTrader: (4)
 
Kgkeen101's Avatar
 
Join Date: Jun 2007
Location: South Florida
Posts: 430
Where can you get the schematics for the whole ECU wiring, what wire does exactly what?
Kgkeen101 is offline  
Reply
Old 09-25-2009, 05:41 PM
  #21  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by Kgkeen101
Where can you get the schematics for the whole ECU wiring, what wire does exactly what?
The FSM.
pmohr is offline  
Reply
Old 10-14-2009, 04:13 PM
  #22  
Org Lurker
iTrader: (10)
 
dukelubas's Avatar
 
Join Date: Nov 2004
Location: Philly
Posts: 403
Does the ECU receive a ground through it's mounting chassis/screws? or is it grounded through the harness/engine ground? Reason I'm asking, I'd like to run with the ECU not in it's chassis.
dukelubas is offline  
Reply
Old 10-14-2009, 05:31 PM
  #23  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by dukelubas
Does the ECU receive a ground through it's mounting chassis/screws? or is it grounded through the harness/engine ground? Reason I'm asking, I'd like to run with the ECU not in it's chassis.
The ECU grounds solely through the two bolts on the LIM (well there may be some in the dash harness, never bothered to look).

If you've seen my A32 CEL video, my ECU is laying on the passenger side floorboard without issue.
pmohr is offline  
Reply
Old 11-18-2009, 05:54 AM
  #24  
Newbie - Just Registered
 
bottz's Avatar
 
Join Date: Dec 2008
Location: Westchester County
Posts: 8
Ok, so I might be off here, but what exactely does the pin-out cheat do for your car. In my case, a bolt on 2000 maxima from NY??
bottz is offline  
Reply
Old 11-18-2009, 06:15 AM
  #25  
Horizontally opposed.
iTrader: (21)
 
mowgli29's Avatar
 
Join Date: Jul 2006
Location: St. Louis, MO
Posts: 1,182
Originally Posted by bottz
Ok, so I might be off here, but what exactely does the pin-out cheat do for your car. In my case, a bolt on 2000 maxima from NY??
Not a whole lot by itself...
But it can be a very helpful reference when trying to wire up a V-AFCII, E-Manage, etc. for tuning purposes. Getting a good tune could be quite beneficial, IMO.
mowgli29 is offline  
Reply
Old 11-18-2009, 05:23 PM
  #26  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by mowgli29
Not a whole lot by itself...
But it can be a very helpful reference when trying to wire up a V-AFCII, E-Manage, etc. for tuning purposes. Getting a good tune could be quite beneficial, IMO.
Indeed, that question confused me, to say the least.
pmohr is offline  
Reply
Old 11-20-2009, 11:08 PM
  #27  
Newbie - Just Registered
 
bottz's Avatar
 
Join Date: Dec 2008
Location: Westchester County
Posts: 8
Again, sorry to ask, but Im trying to figure out what the benefits of the pin-out do for a car. I have a bolt on 2000 Maxima SE 5 speed. Please answer with detail, or how to do this, thanks
bottz is offline  
Reply
Old 11-21-2009, 02:04 AM
  #28  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by bottz
Again, sorry to ask, but Im trying to figure out what the benefits of the pin-out do for a car. I have a bolt on 2000 Maxima SE 5 speed. Please answer with detail, or how to do this, thanks
It does nothing for the car, they're just pictures.
pmohr is offline  
Reply
Old 01-02-2010, 04:21 AM
  #29  
Newbie - Just Registered
 
premaire's Avatar
 
Join Date: Mar 2008
Location: brooklyn ny
Posts: 11
do you have the one for the i35
premaire is offline  
Reply
Old 01-13-2010, 01:26 PM
  #30  
Senior Member
iTrader: (6)
 
MoncefA33's Avatar
 
Join Date: May 2008
Posts: 1,985
All links are dead
MoncefA33 is offline  
Reply
Old 01-13-2010, 07:16 PM
  #31  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by MoncefA33
All links are dead
Indeed, my hosting has been suspended (for the time being). Another DMCA notice from NNA for hosting the FSMs.
pmohr is offline  
Reply
Old 02-01-2010, 06:47 PM
  #32  
Junior Member
 
Maximus681's Avatar
 
Join Date: May 2008
Location: Gibbsboro
Posts: 48
any possible way to get a 99 pin out yet? or still the same answer?
Maximus681 is offline  
Reply
Old 02-08-2010, 02:53 PM
  #33  
No more Maximas...
Thread Starter
iTrader: (26)
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
Posts: 14,331
Originally Posted by Maximus681
any possible way to get a 99 pin out yet? or still the same answer?
No '99 pinout until I can get a definite pinout from a member, or I stumble upon a '99 EC harness and some free time.
pmohr is offline  
Reply
Old 04-09-2010, 09:59 PM
  #34  
Member
 
NJ3ndri's Avatar
 
Join Date: Aug 2009
Location: Parsippany NJ / Pottstown PA
Posts: 267
Originally Posted by pmohr
Should be pin 5, like the rest of the A32s. W/G, IIRC.
W/G would be? White w Green Tracer?
I have the all data pinout for the 99 but doesnt really specify (maybe it does and im blind)
NJ3ndri is offline  
Reply
Old 04-10-2010, 06:37 AM
  #35  
Senior Member
 
SiathLinux's Avatar
 
Join Date: Feb 2010
Location: Altamonte Springs, FL
Posts: 686
Originally Posted by pmohr
No '99 pinout until I can get a definite pinout from a member, or I stumble upon a '99 EC harness and some free time.
If you weren't so far away I'd let you use my car for getting the Pin Out for the '99....

(or you could road trip to FL and do it...)
SiathLinux is offline  
Reply
Old 08-17-2010, 10:31 PM
  #36  
Newbie - Just Registered
 
altimapony's Avatar
 
Join Date: Aug 2010
Posts: 1
hi i have a 2009 altima coupe 3.5 CVT and im having some hard time with the greaddy ultimate e-manage, does someone have the diagram couse i bougth the universal harness and the guy that makes me all the mods ask me to get the diagram please help
altimapony is offline  
Reply
Old 04-27-2011, 08:44 AM
  #37  
Senior Member
iTrader: (83)
 
VQ'rInWLA's Avatar
 
Join Date: May 2010
Location: West Los Doin Tha Most
Posts: 12,670
1 year bump. Can you refresh the pinout pics pls? Need em for a WBo2 install. TIA
VQ'rInWLA is offline  
Reply
Old 07-18-2011, 06:19 AM
  #38  
Newbie - Just Registered
 
moz-art's Avatar
 
Join Date: Jul 2011
Location: Orange CA
Posts: 4
Thanks for those images, this is really helpful on my research.
moz-art is offline  
Reply
Old 08-29-2011, 11:04 AM
  #39  
Newbie - Just Registered
 
SERiousracer's Avatar
 
Join Date: May 2011
Location: League City, Tx
Posts: 15
Very nice, this will come in handy
SERiousracer is offline  
Reply
Old 12-13-2011, 06:26 PM
  #40  
Junior Member
 
bigrak's Avatar
 
Join Date: Dec 2011
Posts: 17
Very helpful, Thanks for sharing!
bigrak is offline  
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Quick Reply: ECU Pinout cheat-sheets (large images, 1000+px wide)


Reply Closed Thread Share

All times are GMT -7. The time now is 11:02 AM.