Quote:
Originally Posted by Pearl93VE
If you want to go that route, the 1993 Honda Accord Intake Kit ALSO works very well on VE's. Because if you have a saw-zaw or even a hacksaw, just make a 90 degree bend out of the S-Pipe they give you and run that below the headlight and into the fender, then just use the other 70 degree pipe that goes from the MAF to the headlight. Only problem is that you have to use your stock Mid-Pipe, but all you have to do is take the resonator off and plug the bottom hole with a PVC cap upside down and crap it in there so the top sits flush with the resonator walls. It's virtually invisible and is effective, though I still want to get a mid-pipe made out of aluminum, I guess I could make one.
Also, if you're trying to go cheap on the VG30E CAI and don't want to buy Pacesetter or Warpspeed or whoever makes them, the 1993 Accord Intake Kit + 90 degree bend is the best solution. The 92-94 Intake will require a LOT of cutting in on the wheel well and IMO looks worse.
|
no sheit sherlock...tell it to the op
