Quote:
Originally Posted by 92hoopty
1) suggest some front speakers (what should fit after i make those bracketS?)
2) suggest some speaker wire to go to my amp from my subs, front speakers, and finally to go from my rear speakers to the head unit
thanks alot guys
fatty
ps welcome to the org chalzor what gen max do you havE?
|
1) I just used the 5 1/4" separates I had from my Integra (I believe they are kenwoods). They pretty much just fit into the stock bose speaker mounts, just had to use self-tapping screws to screw new holes into the plastic.
In the rear I replaced the stock bose speakers with 6.5" separates, again screwing into the bose mounts.
2) 16 Guage for fronts/rears, 12Guage for subs (IMO)
Also, you mentioned you want to run your rears off the deck, this is ok, but if you crank your system, you will have distortion, as your rears wont be able to put out the power to keep up with the rest of your system. I highly suggest a 4 channel amp for fronts/rears.
As for my max, it is a 3rd gen (93), so far only mod I have done is z32 (90 300zx) rims (Chromed set I had on my z32). I plan to do a bunch of updates to it though in the near future. Including taking the brakes off my z32, milling the rotors radius down 3mm, and going to 4 piston z32 calipers on the max
. Yay free parts.
Trying to get up to the 15 post limit so I can actually post a thread about my project/ideas... hate this stupid limit. Such a barrier to actually participating in the forum (IMHO). I'm the type to read through as much as I can on a forum before I ask a single question.