Quote:
Originally Posted by SoonerFan
from Hawk's website
Bed-in Instructions
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
|
Yep, i had hawk hps pads on my car for like 3 weeks and the braking was inconsistent to the max... til i did a couple of 100 to 0 hard braking off an empty highway exit ramps at like 2 in the morning.. Now braking is decent when cold, and extremely good when warm
__________________
2001 Nissan Maxima 20th Anniversary Edition w/ only 65k on it  (11/8/09)
Suspension-
Eibach Springs on Illuminas set to 4F/4R
Stage 2 LTB Installed!
Now I need a RSB
Audio-
JLAudio 12W7 in a 2.3cuF (same box, ghetto sealed)
JLAudio 500/1 @ 85hz
Rainbow SLC 255 Comps
Alpine V12 MRV-F407 @ 75hz
Optima Bluetop D35 (1/2 Grounding Kit done)
|