Quote:
Originally Posted by Skorp1on
yup...tried it. It's not reverse, it's normally threaded.
|
Yikes....you may be SOL. It sounds like you cross-threaded it. When you put it on were you able to thread it on by hand easily? Were the threads intact? not chaffed or worn down? If you had to use a wrench to put it back on then most likely you cross-threaded the nut.
I would get a pipe and a longer breaker bar along with just PB blaster. Spray the PB blaster on the nut, let it sit about 10 minutes then grab a friend and go to town on it. Hopefully you can get it off even if it's cross-threaded. The only bummer is that might need a new axle if it's cross-thread.