Quote:
Originally Posted by Norkoastal
Got any tips for getting the nav display unit out??? I want to swap my analog clock bulb and dont know if I should try to pull the nav out then get to the clock, or go through the vent like the non nav folks have recommended...
Thanks
Brad
|
It's easier than it sounds to get to the clock, and you don't even have to take the nav screen out because its not connected to the dash piece at all - just make sure the screen is down when you work on it. Pry off the vent piece (works best to pry with a cloth/flat screw driver on the left side of the vent btwn the dash and vent piece). There are only two screws that hold the top cover on that hides the navigation screen. Unscrew them (they're right in the front and you'll see them when you pull off the vent) and the top dash piece should snap out if you pull it toward you and slightly up. The rest is self explanitory.