Maxima Forums - View Single Post

jasonmax · 06-03-2008, 12:25 PM

Remove the MAF:
1. Clean the area around the MAF and blow away the dust on it.
2. Press the clip on the socket and pull upwards to dissconnect the MAF.

3. Unsrew to screws that hold the MAF using the Torx screwderiver #15. Pull the MAF upwards to remove from the housing. If it's difficult to pull it out, twist the MAF 90 degree, so you can pull it out with your both hands.

4. Remove the MAF carefully from the housing and make sure you don't drop it. Clean the housing and cover it with a damp towel to prevent dust getting in.

06-03-2008, 12:25 PM	#2
jasonmax Senior Member 2002 Maxima GLE Join Date: Sep 2007 Location: Omaha, NE iTrader: (2) Posts: 1,406	Remove the MAF: 1. Clean the area around the MAF and blow away the dust on it. 2. Press the clip on the socket and pull upwards to dissconnect the MAF. 3. Unsrew to screws that hold the MAF using the Torx screwderiver #15. Pull the MAF upwards to remove from the housing. If it's difficult to pull it out, twist the MAF 90 degree, so you can pull it out with your both hands. 4. Remove the MAF carefully from the housing and make sure you don't drop it. Clean the housing and cover it with a damp towel to prevent dust getting in. __________________ Life would be boring without the Maxima. From Nebraska? Go here: http://forums.maxima.org/midwest-tex...ebraska-9.html You wanna clean your MAF under 10 bucks? Go there:http://forums.maxima.org/5th-generat...10-w-pics.html Last edited by jasonmax; 06-06-2008 at 10:35 PM.