Maxima Forums - View Single Post

jasonmax · 06-03-2008, 12:24 PM

I've seen a lot of people asking about how to clean the MAF, so I decide to do my own and show it to them.

Things you need during the cleaning:
CRC MAF cleaner
Torx screwderiver #15
10mm wrench

Preparation:
Park you car under a shade or a place that isn't dusty.
Disconnect the bettary using the 10mm wrench to avoid damaging the ECU.

Location:
The Mass Air Flow sensor is located on a tube between the engine filter box and the throttle filter.

06-03-2008, 12:24 PM	#1
jasonmax Senior Member 2002 Maxima GLE Join Date: Sep 2007 Location: Omaha, NE iTrader: (2) Posts: 1,406	Write up: How to clean MAF under $10 w pics I've seen a lot of people asking about how to clean the MAF, so I decide to do my own and show it to them. Things you need during the cleaning: CRC MAF cleaner Torx screwderiver #15 10mm wrench Preparation: Park you car under a shade or a place that isn't dusty. Disconnect the bettary using the 10mm wrench to avoid damaging the ECU. Location: The Mass Air Flow sensor is located on a tube between the engine filter box and the throttle filter. __________________ Life would be boring without the Maxima. From Nebraska? Go here: http://forums.maxima.org/midwest-tex...ebraska-9.html You wanna clean your MAF under 10 bucks? Go there:http://forums.maxima.org/5th-generat...10-w-pics.html Last edited by jasonmax; 06-03-2008 at 10:53 PM.