|
I've used Hawk HPS pads with 12.6' X-drilled rotors for the last 4yrs and they have never squealed! I don't think you've installed the right SS shims with the spring loaded finger that on the back of the pad! (they snap on)
What I normally do is clean the back of the pads with MEK or acetone. Spray a decent coat of Disc Brake Quiet on the backs of the pads until it is partially dry apply the spring loaded shims and the spray another coat and let almost dry! Be sure all the adapter pad holders are clean and lubed with Hi-temp synthetic grease! Then bed the pads! If you have squeaking that means there is something (pad shim or pad holder) moving at a very hi frequency! So be sure that even your pad holders that fit onto the caliper adapters spring loaded clips are able to hold them securely. If any of the pad holders are loose (broken fingers) there's your source! Just order a hardware kit from the dealer or ABC Nissan!
|