Maxima Forums - View Single Post

*SoonerFan* · 04-22-2008, 08:45 AM

from Hawk's website

Bed-in Instructions

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.

04-22-2008, 08:45 AM	#9
SoonerFan tru story 02 Max and 08 X Join Date: Sep 2003 Location: OKC, OK iTrader: (4) Posts: 22,507	from Hawk's website Bed-in Instructions 1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure. 2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph. 3. DO NOT DRAG BRAKES! 4. Allow 15 minutes for brake system to cool down. 5. After step 4 your new pads are ready for use. __________________ Represented by: Graham Motorsports Media 2008 Xterra Off Road (N50 \| VQ40DE \| KH3) 06 Mazda 6 Maxima - A33 \| VQ35DE \| RS6F51A \| KH3/G NWP Engineering Thermal Intake Manifold Spacers Hybrid Berk/Frankencar Intake \| Frankencar catback \| Cattman STS \| ES 6-speed bushings H&R Springs \| Tokico Struts \| Progress RSB \| Otto FSTB \| Blemco LTB \| Hawks HPS Pads \| Custom Front Lip O2 Sensor Locations and Corresponding Codes