[NmexMAX]

It consists of all 76.2mm ‘hardware’, with the small exception of the MAF adapter, which is 82mm. After some physical measurements / test fits, it seems as if I will not have to purchase a 76.2mm MAF adapter JUST so everything is the right size. A few couplers later, it will all bolt up, and I won’t have to ‘tune’ the lean’ess’ out of the idle since my PCV will be functional again.

This is how I plan on setting it up: JWT POP / 76.2mm MAF housing / Custom 76.2mm midpipe w/ PCV barb / TB Toss in some couplers & hose clamps also and some ingenuity to secure it down if the JWT bracket doesn’t do the job.