View Single Post
Old 02-25-2008, 12:26 AM   #420
CapedCadaver
Call me Wookiee Goldberg
 
CapedCadaver's Avatar
 
Join Date: Feb 2007
Location: Raleigh, NC
iTrader: (7)
Posts: 16,366

Quote:
Originally Posted by jayasartu View Post
okay so i'm needing to replace my heatercore as it's badly ruptured. so i buy the repair manual and it tells me to drain the coolant out of my radiator. i found that drain plug no problem. second it tells me to unscrew the draincock and it shows me a picture of it right behind my alternator. i go underneath the car and i find no such drain plug and screw near the alternator, nor do i find it anywhere else? can someone please tell me where i should look or even better if someone has a picture of where it is? any help would do.. my maxima has been sitting duck for a month since i can't drive it as the heater core is making a whole load of coolant vapour come out my air vents
unless your radiator is .. well, unique, it should be bottom-center on the engine-side. with a little clear rubber tube sticking down an inch from it. i forget if it was threaded or if you can twist either way while pulling, but either way mine was rather stiff when i had to drain a little bit of coolant to replace my engine temp sender.
__________________
PieceOut.FallToPeaces New to the forum? CLICK HERE!!!!
1985 Nissan 300zx 2-seater: VG30E | 5spd Swap | Bilstein | 5-lug conversion | Polyurethane everything | Resurrection-in-progress!
2004 Honda Civic EX Coupe: 1.7L VTEC | 5spd | CAI soon | LED tails and Projectors soon | ES Poly Motormounts soon | 'bad weather' car/backup for teh Z
1990 Nissan Maxima GXE: VG30E | VLSD-5 swap | Exedy | NWP | a33b(F)/z31(R) BBK | ES poly | SE susp swap | 2k2SE 17s | retired Aug 28th '09
2005 Nissan Maxima SE: VQ35DE | 6spd | Carolina Panthers front lisence plate | Brother's car, not mine | <-- Therefore still 100% stock
Quote:
Originally Posted by JasonOksa View Post
Horsepower, torque and speed are all known by The State of California to cause cancer, birth defects, and reproductive disorders.
Quote:
Originally Posted by bigleman View Post
how much would it cost to resleeve?

how does an aluminum motor form rust on the cylinder walls???
DO NOT PM ME ABOUT PROBLEMS WITH YOUR CAR UNLESS I TELL YOU TO. THAT'S WHAT THE FORUM IS FOR
CapedCadaver is offline   Reply With Quote