Maxima Forums - View Single Post - Ditching the Max, any MN guys need parts? JWT ECU anyone?

*bigtimber* · 11-26-2007, 08:08 PM

Well after being in the family for 11 years, I am finally getting rid of my Maxima. It was a good car, but being a poor college student for the past couple years I gave up modding it and it's really gone downhill cosmetically. It's my father's car still and he wants to give it away for a tax rebate, but before it goes I'm going to take off some of my mods. I figured I should give the MN guys the first shot at it.

I WILL MOST LIKELY BE TAKING THIS STUFF OFF IN LATE DECEMBER. I'm listing it here now so I know what you Minnesota guys want. For reference it is a 1996 Nissan Maxima GLE (yeah, it's an automatic). My cardomain page can be seen here:
http://www.cardomain.com/ride/758981

Here's a list of some of the parts that I will be taking off and selling:

*JWT ECU with the 7200 RPM rev limiter
*Front strut bar
*Diamond plate floor mats - scuffed up from use but still in pretty good condition
*2 Kicker Comp VR12 subwoofers with a 1200 Watt amp in a big heavy box
*17" RS Limited Mase rims with Kumho Ecsta 711 tires - only on for 2 summer-falls (at least 70% tread left, probably more)

If you are willing to swap for your stock parts, I would also be willing to part with:
*blacked out stock tails (would have to be another 95-96)
*smoked clear corners (theres a bit of a chip in one of them)
*black spark plug cover

There are also a couple things which I'll probably just leave on due to the fact that they'll be fairly difficult to take off, and also because it'll be really cold outside when I do. If you want these you'll either need to have a heated garage for me to work in or make me a really good deal (possibly both):
*MEVI with all the trimmings (vaccum canister, RPM switch, various hoses) - this would need to be a swap because I don't have my old manifold anymore
*Y-pipe/exhaust - the magnaflow shown on my cardomain was swapped for an 04' dual tip Altima muffler due to noise, so now it's pretty much just as quiet as stock. The catback is a custom made 2.5" - but it was pressure bent rather than mandrel bent

You can check out my cardomain page to see if there's anything that you want that I missed. Feel free to post here with comments or feedback, but any offers should probably be made through PMs.

And as for my new car, I think I'm gonna go with the 2008 Mazdaspeed3 GT (in black, of course). It was between that and the new Altima Coupe, which is awesome but a little out of my price range for everything I wanted on it and not very practical space-wise. Oh well.

I guess this is my farewell...

11-26-2007, 08:08 PM	#1
bigtimber Donating Maxima.org Member Join Date: Jul 2003 iTrader: (3) Posts: 400	Ditching the Max, any MN guys need parts? JWT ECU anyone? Well after being in the family for 11 years, I am finally getting rid of my Maxima. It was a good car, but being a poor college student for the past couple years I gave up modding it and it's really gone downhill cosmetically. It's my father's car still and he wants to give it away for a tax rebate, but before it goes I'm going to take off some of my mods. I figured I should give the MN guys the first shot at it. I WILL MOST LIKELY BE TAKING THIS STUFF OFF IN LATE DECEMBER. I'm listing it here now so I know what you Minnesota guys want. For reference it is a 1996 Nissan Maxima GLE (yeah, it's an automatic). My cardomain page can be seen here: http://www.cardomain.com/ride/758981 Here's a list of some of the parts that I will be taking off and selling: JWT ECU with the 7200 RPM rev limiter Front strut bar Diamond plate floor mats - scuffed up from use but still in pretty good condition 2 Kicker Comp VR12 subwoofers with a 1200 Watt amp in a big heavy box 17" RS Limited Mase rims with Kumho Ecsta 711 tires - only on for 2 summer-falls (at least 70% tread left, probably more) If you are willing to swap for your stock parts, I would also be willing to part with: blacked out stock tails (would have to be another 95-96) smoked clear corners (theres a bit of a chip in one of them) black spark plug cover There are also a couple things which I'll probably just leave on due to the fact that they'll be fairly difficult to take off, and also because it'll be really cold outside when I do. If you want these you'll either need to have a heated garage for me to work in or make me a really good deal (possibly both): MEVI with all the trimmings (vaccum canister, RPM switch, various hoses) - this would need to be a swap because I don't have my old manifold anymore Y-pipe/exhaust - the magnaflow shown on my cardomain was swapped for an 04' dual tip Altima muffler due to noise, so now it's pretty much just as quiet as stock. The catback is a custom made 2.5" - but it was pressure bent rather than mandrel bent You can check out my cardomain page to see if there's anything that you want that I missed. Feel free to post here with comments or feedback, but any offers should probably be made through PMs. And as for my new car, I think I'm gonna go with the 2008 Mazdaspeed3 GT (in black, of course). It was between that and the new Altima Coupe, which is awesome but a little out of my price range for everything I wanted on it and not very practical space-wise. Oh well. I guess this is my farewell... __________________ MN Nissan/Infinity Forum Last edited by bigtimber; 11-26-2007 at 08:16 PM.