doublea

iTrader: (7)

Hey guys, for the ones who remember me, I've been working on this project for over 10 years now: https://maxima.org/forums/all-motor/...n-project.html

Long story short, I'm in the garage trying to start the engine and I need advice about the fuel pressure regulator. I've hooked up my laptop and Nissan Data Scan II and I have no code as everything has been taken care of (codes, sensors, ignition coils etc), but when I crank the engine I dont see any pressure on the fuel pressure regulator dial ? it was initially set at 43 psi, if I'm not mistaking.

Am I'm supposed to see the pressure needle to raise as soon as I crank it ? Can it be the diaphragm that is shot. Or did I hooked up something in the wrong direction, i.e.: fuel line, return etc.

I've never been so close to see the M reborn in the last 10 years ... Can wait for answers.

Thanks for any input.

AA

doublea

iTrader: (7)

I'm a little bit confuse, I think I might have mixed the fuel line... it's been a while since I've work on this, cant seem to remember.

Anyone who can help ? You can call me: 514-796-3151

doublea

iTrader: (7)

I found an old pic, it seem that I have screwed the fuel Dampner in the wrong place, the pic that I found show the dampner to be hooked up on the rear fuel rail, but now i just need to properly hooked the FPR. I have a megan FPR...