SS 5.5 gen 6spd clutch line
06-16-2014, 04:32 PM
#6
Yup got the site and got a local place to have it made if necessary. I just need the length and fitting size. I didn't measure the length before I removed the manual tranny.
06-21-2014, 01:21 PM
#7
Follow-up.
Ordered one of these today from Techna-Fit.
Here are the details in case anyone is doing this in the future.
- 54" of part#300-03-Custom with a straight banjo part#S3092-03S on one end and a 90 degree bend female part#S1091-03S at the other.
- 1 @ part#10125-03 MALE BRAKE ADAPTER -3 TO 10MM X 1.25 - STEEL (CONCAVE SEAT)
- 1 @ part#775-102S BANJO BOLT - 10MM x 1.25 BANJO BOLT - 20MM LONG, REQUIRES (2) 10MM WASHERS - NOT INCLUDED
- 4 @ part#901-03CW WASHER - 10MM COPPER
Total cost $29.30 plus outrageous shipping to Canada.
I'll let you know how it fits.
Ordered one of these today from Techna-Fit.
Here are the details in case anyone is doing this in the future.
- 54" of part#300-03-Custom with a straight banjo part#S3092-03S on one end and a 90 degree bend female part#S1091-03S at the other.
- 1 @ part#10125-03 MALE BRAKE ADAPTER -3 TO 10MM X 1.25 - STEEL (CONCAVE SEAT)
- 1 @ part#775-102S BANJO BOLT - 10MM x 1.25 BANJO BOLT - 20MM LONG, REQUIRES (2) 10MM WASHERS - NOT INCLUDED
- 4 @ part#901-03CW WASHER - 10MM COPPER
Total cost $29.30 plus outrageous shipping to Canada.
I'll let you know how it fits.
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM