Scott LaRock

iTrader: (5)

camshaft sensor connector for a 2002 maxima se.

https://dl.dropboxusercontent.com/u/...2013.21.44.jpg

the green clip doesn't lock the sensor into place anymore, I think this is why I'm getting the sensor error.

I exchanged the sensor at Napa today and it's still happening as it did yesterday.

Simardfosgate3

If someone can confirm that a DEK connector/one from an I30 will fit then I can get you one for simply shipping...

Scott LaRock

iTrader: (5)

Can someone assist?

tosheto

iTrader: (5)

They are the same engines. I do not see why they would be different. If the sensors are the same, then the plugs should be the same.

NmexMAX

iTrader: (22)

Not the same engine.

OP, check a junkyard and pick up an extra engine harness. I've done this in the past for my 4th gen, and it's a smart investment.

Scott LaRock

iTrader: (5)

I need to change the whole harness or just the clip?

NmexMAX

iTrader: (22)

Just splice/replace whatever connector/clip you need.

Chris Gregg

iTrader: (59)

Trying to remember if that sensor was part of the recall?

Might want to contact local Nissan dealer and see if there are any open recalls on your car. I know mine got in on that recall, I believe it was the CPS.

tosheto

iTrader: (5)

Why would 02 Maxima and 02 I30 have different engines? Maybe I am missing something. All well.

NmexMAX

iTrader: (22)

Never heard of an 02 I30, 02 I35, yes.

And I was referring to this about the DEK, because the DEK is not the same as what's found in an 02 Maxima/I35.

I was replying in reference to this.