Strange metal on metal after start up....
#1
Strange metal on metal after start up....
Every morning whether I let my car heat up to operating temp or not, when I first pull off there is a loud metal scraping sound coming from the back of the car. I just got a new brake caliper rear left, and pads all around 3 months ago then my tranny went up. The car sat for 3 months and the caliper is very rusty. Stopping power is so-so at best and even worse when pads are hot. Still have factory rotors.
WTF
WTF
#4
Just to clarify, it sounds like you didn't really drive it much after you got the new pads? Did you have the rear rotors turned?
My experience has been to only put new pads on freshly turned rotors or new rotors. Old rotors tend to have grooves from rocks or debris. I've put new pads on old un-turned rear rotors before and they never stopped making noise.
My experience has been to only put new pads on freshly turned rotors or new rotors. Old rotors tend to have grooves from rocks or debris. I've put new pads on old un-turned rear rotors before and they never stopped making noise.
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
7
05-16-2021 11:18 AM
97_GXE
4th Generation Maxima (1995-1999)
5
09-15-2015 06:47 AM
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM
trungg86
4th Generation Maxima (1995-1999)
7
09-04-2015 04:58 AM