5th Generation Maxima (2000-2003)Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
My exhaust is rusted through, and I need a new one. Im looking at this link.. its $100 shipped for the full catback, all stainless, and mandrel bent. looks good on paper, but don't want it to sound like crap. It has a 4" tip, which I am not fond of, but I like the price tag. Has anyone tired this setup out before, and if so, how is it? thanks.
If you want a budget cat-back check out a Tsudo exhaust on ebay. I had one on my Integra back in the day, and it was nice. Its a little more than the one you are thinking of, but at least I can tell you its good quality.
__________________
J Schultz
2003 Titanium SE Auto
Exterior mod: Tint
Performance mods: GAB w/ KN panel filter, NWP vias delete, Timing 17*BTDC, Custom test pipe/ exhaust cut-out, drop resistor mod.
Best 1/4 Mile Time: 14.6
man there aint no more line than you get what u pay for on this forum it sounds decent bro, thats the catback VQmonster was using at the track event and nobody was saying nothing then, its not the most quiet i agree but at the sametime, the others arent really that quiet either... if u plan on doing a straight through 2 1/2" piping then yes it will be loud but if your using stock cat then it doesnt matter...
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
looks the exact same as the greddy except the greddy logo on the side, and i loved my greddy, nothing to be ashamed of... i could see if you had a smaller car with a friggin 6" tip then yea, but its really not bad... i loved mines so much that i had to share it to the world lls
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
Last edited by Grand_hustle17; 07-01-2009 at 03:41 PM.
Yeah, I had the Stillen 4" tip full cat with Y, and it sounded mean - I loved it. But that all rusted through, and I had to put the factory back on. Now that rusted through, and It is literally hanging. Money are really tight these days as I am sure some of you can relate, and I am looking to get out of this issue cheap. I can put up with the 4" tip.. I am getting older now and rather not have the huge tip... wanted a smaller dual tip, but beggers can't be choosers. But if it sounds half way decent, then I can live with the tip. For $100, I guess it's worth a shot if no one else has tried it out yet.
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
looks the exact same as the greddy except the greddy logo on the side, and i loved my greddy, nothing to be ashamed of... i could see if you had a smaller car with a friggin 6" tip then yea, but its really not bad... i loved mines so much that i had to share it to the world lls
That second video is hilarious with the bubble-text, "Steam. No worries." The first video sounds better than the second, and I think that Greddy sounds sweet.
Appearance is obviously subjective. There's a whole community of enthusiasts who do everything possible to move away from the stock look. (That isn't me, hence this opinion.)
But if you get one of those wide, single-tip exhausts, you take the Maxima into a different crowd. That's the look you see on rusty Civics with wheel spacers. Performance aside, no matter how nice the car, that wide, single-tip muffler screams tacky.
It isn't pretty. Don't do it, man. Get something with a dual-tip.
Or buy the cat-back, and custom fit a Borla muffler on the end. I've always wondered how difficult it would be to get a Borla on the Maxima.
__________________
NWP phenolic intake spacers, Cattman y-pipe, Cattman 2.5" cat-back, Frankencar short-ram intake, Apexi pop charger, UR crank pulley, ES motor-mount and sub-mount bushings, Racingline FSTB, Progress RSB, STS mod w/ES bushings, Brembo blanks, Hawk ceramic pads, Goodyear Eagle F1's -- 54,000 original owner miles
That second video is hilarious with the bubble-text, "Steam. No worries." The first video sounds better than the second, and I think that Greddy sounds sweet.
Appearance is obviously subjective. There's a whole community of enthusiasts who do everything possible to move away from the stock look. (That isn't me, hence this opinion.)
But if you get one of those wide, single-tip exhausts, you take the Maxima into a different crowd. That's the look you see on rusty Civics with wheel spacers. Performance aside, no matter how nice the car, that wide, single-tip muffler screams tacky.
It isn't pretty. Don't do it, man. Get something with a dual-tip.
Or buy the cat-back, and custom fit a Borla muffler on the end. I've always wondered how difficult it would be to get a Borla on the Maxima.
the first video is my old 00 with the greddy, i understand ur statement, however im more open to all exhaust style and also civic's (im actually about to get a 92) yes you prefer the dual tips, (which is what i have now also.......... EBAY) both sounds great and actually looks good on a maxima
ebay dual tip
Greddy
they both look good
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
While I lean heavily to a stock preference, I have to admit your red-tail, debadged, spoiler-delete look in the second photo is very clean and attractive. Nice job, Mr. Hustle.
Except the soupcan, which says, "It's me making all that noise. Look at me."
I probably had a different opinion decades years ago - can't remember. (And back in 1990, I also owned a Civic! Fun car, great mileage. But no soupcan.)
Picture: Cattman dual-tip.
__________________
NWP phenolic intake spacers, Cattman y-pipe, Cattman 2.5" cat-back, Frankencar short-ram intake, Apexi pop charger, UR crank pulley, ES motor-mount and sub-mount bushings, Racingline FSTB, Progress RSB, STS mod w/ES bushings, Brembo blanks, Hawk ceramic pads, Goodyear Eagle F1's -- 54,000 original owner miles
I completely agree. I much rather have a dual tip then anything! But price is a concern for me right now... mortgage payment, or better muffler... hmm. hah. But, even with the 4" tip, it looks a lot better IMO if you have the Stillen rear lip - it hides the muffler, and the tip isn't as exposed like in the above pictures, so it doesn't look out of place as much.
While I lean heavily to a stock preference, I have to admit your red-tail, debadged, spoiler-delete look in the second photo is very clean and attractive. Nice job, Mr. Hustle.
Except the soupcan, which says, "It's me making all that noise. Look at me."
I probably had a different opinion decades years ago - can't remember. (And back in 1990, I also owned a Civic! Fun car, great mileage. But no soupcan.)
Picture: Cattman dual-tip.
hahaha thank you on the complements, the second pic is of my previous 00 GXE (best car i ever owned) so i had no spoiler and the tails were red, until i re did it lol, it was really quiet though...
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
hahaha thank you on the complements, the second pic is of my previous 00 GXE (best car i ever owned) so i had no spoiler and the tails were red, until i re did it lol, it was really quiet though...
Everyone has a regret-car... the one you should have kept. For me it was a 1992 Nissan 240SX Coupe. Loved that little coupe.
Silvermax2k2, even if you're not getting exactly the exhaust you want, at least you're planning a better performing exhaust than stock, and for far less money. I hope it works out for you.
__________________
NWP phenolic intake spacers, Cattman y-pipe, Cattman 2.5" cat-back, Frankencar short-ram intake, Apexi pop charger, UR crank pulley, ES motor-mount and sub-mount bushings, Racingline FSTB, Progress RSB, STS mod w/ES bushings, Brembo blanks, Hawk ceramic pads, Goodyear Eagle F1's -- 54,000 original owner miles
Everyone has a regret-car... the one you should have kept. For me it was a 1992 Nissan 240SX Coupe. Loved that little coupe.
Silvermax2k2, even if you're not getting exactly the exhaust you want, at least you're planning a better performing exhaust than stock, and for far less money. I hope it works out for you.
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
if you wanted it, hope you got it cause its gone now...
__________________
2K2 SE 6 speed Grey Lustre SE Every option minus navi, black leather, HLSD, Hotshot headers, Cattman Catback, Frankencar WAI, HP autoworks STS, ES motor mount inserts, ES shifter bushings, FSTB, RSB. JIC FLA-1 coilovers, A34 Brakes Hawk HPS pads, TR Motorsports MT1's, Toyo 4s, 64,000 original owner miles.
somebody else wasnt playin lls... i bet its someone off the org that saw the link and voltured it
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
well i went and did a custom exhaust because of the money issue. it cost me 140. I like the way it sounds. I dont have a sound clip yet, but as soon as i do ill post it up.
you pay for what you get... doesn't sounds like a good buy. I would do some more research see if you can find a better one.
man u must of heard friends with that line, you even said it backwards i agree with you though you do get what you pay for, in this case you paid for an exhaust and thats exactly what will come to your door... what more did you want, strippers???
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
price went up, now 140 shipped, and suddenly not worth it for me...
__________________ Formerly Rogertight
Other car 1986 maxima: 3rd gen suspension , HID projectors(phillips 85122+ D2S bulbs), other goodies--> http://www.cardomain.com/ride/520274STILL IN THE FAMILY
price went up, now 140 shipped, and suddenly not worth it for me...
crazy how when companies get a couple of sales they raise the price lls
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
crazy how when companies get a couple of sales they raise the price lls
got it anyways since there was a hole in my b-pipe where the flange is(big enough to make it sound crappy). I know, sorry excuse to get it, but I bit. The workmanship is good, mandrel bends, mig welded, and it has a 16" resonator(too small IMHO). The exhaust is made to work together, as in, the length of the b-pipe lends itself only to their axle back, unless you want the b-pipe to be constantly touching on various parts of the car.
Now, the axleback supplied with it lets out a sound that is well, one word, ricer-esque (if you have an aftermarket y-pipe like I do). It may very well sound different If you have it sans y-pipe. The sound is going to give me nightmares(i really hate that coffee-can sound) The tone was much deeper when I used the aftermarket axleback I originally had on, but it would cause the b-pipe to hit(axleback tubing was shorter length).
I am ultimately going to keep the b-pipe on, but probably hack off the muffler, and have a new one put on. I am going to go back to my stock muffler so I can sleep in peace, and not cheapen my car with that crappy sound(since I have worked to seperate myself from the "ricer" crowd, IMHO.) In the meantime, the max will sit, and collect dust, as I refuse to drive the car with that sound coming out of it. my poor baby!!
__________________ Formerly Rogertight
Other car 1986 maxima: 3rd gen suspension , HID projectors(phillips 85122+ D2S bulbs), other goodies--> http://www.cardomain.com/ride/520274STILL IN THE FAMILY
Last edited by Mr. Blue Sky; 07-16-2009 at 05:04 PM.
probably will be loud. but, exhaust is an exhaust. got mine custom built for $250 with a $80 muffler. cheap, gets the job done, but loud. glad i got a muffler with a silencer.
NAPA has the entire Bosal Oem exhaust if you want to stay stock like...Or invest into Cattman's Catback, or Megan Racing ...it's your choice! I sure hope you got that Ebay exhaust since it's gone now!
or, you can just buy a 30" resonator and have a shop install it... 16" is what most companies use for our cattbacks however i do give credit where its due, cattman uses 22"
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'