Thinking of ordering these Wheels! Opinions are Welcome

[Mu_036sp]

I have a 03 sheer silver Maxima. Ordered Tein s tech springs already so ill have a 2.2 in drop. how would these rims look on my car?

http://www.maaswheels.com/images/203MS_M203.jpg

They are 18" and offset is 42

[94CSI]

I think those look good. Be sure to post pics once you get them

[RacerX1320]

Wouldnt look bad with your color at all, what size are you getting?
Post pics after you get them.

[Mu_036sp]

They are 18"

[Tippy Toes]

I think they look nice, reminds me of my 20's. Be sure too take pics.

[Mu_036sp]

yea, im not trying to get the "dub" look. They just look a little like the G37 wheels in my opinion.

[Rochester]

If it weren't for the edgy design at the ends of the spokes (which is kind of neat), and the faux bolts, they look a lot like G37S rims. Bolts around the rim is not a good look. The 5 extra center holes looks rather odd, too.

However, those are personal nits. They'll probably look real good on sheer silver. I like the overall design and the toned down luster.

[M1RAG3]

saving people the time of clicking the link:




The face of the wheel is nice but IMO the universal 10 hole bolt pattern just kills the wheel....screw 18s go with 19s...If I could do one thing again I would have bought 19s!!!

[Mu_036sp]

If they had 19" i would but its 18" the biggest they have

[HotshotVQ35]

looks too busy for me, but hey its your car..

[Tippy Toes]

they look nice, go staggered if you get them or if they make them, thats my only complaint when I bought mine. 10 bolts does kill them.

[ofsalesmen]

Color-wise, they'll work great, but the extra bolt holes look, well, extra.

I say go for them.

[The Law]

Weak offset. Should get lower offset

[gxe2se]

lips on 18" just looks small for me. But if you like them, cool. They look good, to bad not available in 19".

Overall clean. I always like to see orgers with rims that aren't common, run of the mill designs.

[NmexMAX]

How wide are they?

[Mu_036sp]

They are 7.5 wide. and tire size i wanted to get 235/40's all the way around. with that offset will they poke in or out?

[NmexMAX]

W/ that width / offset & A33 chassis, they will be wayyy IN. Too much for my taste.

[Arisotezza18]

The design would work well on the car, but the offset is way too high. You can run a 15-20mm spacer and you'd be good to go.

[Mu_036sp]

If i was to get them. Should i get 15 in the front and 20 in the Rears? or 20 all the way around?

[e-subliminal-2]

I'd get 10-15. I think 10 would make them flush.

[bigpopaj369]

IMO i really like them except the uni lug 10 hole pattern (even tho i have it) and spending the cash for a new set of wheels that are only one inch bigger is to ME a waste. just my 2 cents

[Prophecy99]

Originally Posted by M1RAG3

saving people the time of clicking the link:



The face of the wheel is nice but IMO the universal 10 hole bolt pattern just kills the wheel....screw 18s go with 19s...If I could do one thing again I would have bought 19s!!!

The univerals is odd +1

You can say that again, 18s were huge on a 3rd gen, and now they are...a bit too small on 5ths...

But on the other hand if I got 19's I bet they wouldnt have stayed in one piece.

[Mu_036sp]

Thanks guys! I've decided not to order them, going to look for M35 wheels or do a little stuff to me stockers.

[dustey]

Good decision. You dont want to make that investment and end up feeling just OK about it. No sense in rushing a decision on wheels.

[tac8998]

i personally kinda like the universal look, its kinda unique.

[MIK3]

Originally Posted by tac8998

i personally kinda like the universal look, its kinda unique.

Haha, and I kinda like the clarity in that oxymoron.