Need Help with Part # for screw (pic inside)

Reply Subscribe

Thread Tools

Search this Thread

01-05-2009, 01:22 PM

Stereodude

Senior Member

Thread Starter

Join Date: Sep 2001

Location: Detroit Metro Area

Posts: 1,617

Need Help with Part # for screw (pic inside)

Last week I replaced the belts on my 2002 Maxima and in the process of removing the plastic shroud / cover the two plastic screws would not come out and they subsequently got destroyed. I went over the diagrams on www.courtesyparts.com and the service manual, but could not find a part number for them.

For clarity sake these are the two plastic screws I'm referring to:

Does anyone know the part number for these so I can order them?

Thanks!

01-05-2009, 01:52 PM

CMax03

Senior Member

iTrader: (3)

Join Date: Oct 2007

Location: Houston, Tx

Posts: 9,538

Quote:

Originally Posted by Stereodude

For clarity sake these are the two plastic screws I'm referring to:

Does anyone know the part number for these so I can order them?

Thanks!

Yeah here it is...Buy yourself about 12 of them they come in handy.
http://www.courtesyparts.com/64837e-...3-p-51407.html
P/n 64837E ok....

Last edited by CMax03; 01-05-2009 at 02:02 PM.

01-05-2009, 01:58 PM

Stereodude

Senior Member

Thread Starter

Join Date: Sep 2001

Location: Detroit Metro Area

Posts: 1,617

Quote:

Originally Posted by CMax03

Yeah here it is...Buy yourself about 12 of them they come in handy
http://www.courtesyparts.com/maxima-...2070_2074.html

Your link was messed up (fixed now), but I can't believe I looked at that diagram so many times and missed it.

Direct link

Last edited by Stereodude; 01-05-2009 at 03:53 PM. Reason: Add comment

01-05-2009, 02:37 PM

VQP0WER

Senior Member

Join Date: May 2008

Location: Moore, OK

Posts: 1,767

My local Autozone had those plastic fasteners. Get a regular bolt at a hardware store.

01-05-2009, 03:54 PM

Stereodude

Senior Member

Thread Starter

Join Date: Sep 2001

Location: Detroit Metro Area

Posts: 1,617

Quote:

Originally Posted by VQP0WER

Get a regular bolt at a hardware store.

I don't need a bolt, just the plastic fasteners.

On a side note the lower bolt snapped when I tried to take it out, I drilled it out and now have a zip tie in it's place.