just bought LED's 1157 and load equalizers from autolumination. I installed them today, and the LED's came out nice. however, i noticed if there was something wrong with them. i remembered when i turn the headlights on, the signal lights should be dimmed, but mine was not. is there anything wrong with the LED's? Or that's the way they were?
hmm, that's weird. I usually go with the higher end ones, they've always solved my problems.
Lemme ask you quick questions. where did you splice the wire? i spliced my to black wire, and green wire. i've tried all the possibilities:
Black and Red = blink normally but when the headlights on, it wont blink
Red and Green = blink too fast
Black and Green = blink normally with or with the headlights on.
I did black and green with 6ohm loaders, LED's also from autolumination.
Spliced the wire in the middle I believe and I may have spliced into another. i have the /D: light on, displayed in the dash, although there are no lights bulbs hooked up in the rear. That could be the problem.
Last edited by Tippy Toes; 11-15-2008 at 04:40 PM.
Lemme ask you quick questions. where did you splice the wire? i spliced my to black wire, and green wire. i've tried all the possibilities:
Black and Red = blink normally but when the headlights on, it wont blink
Red and Green = blink too fast
Black and Green = blink normally with or with the headlights on.
yup, thats how i spliced mine, black and green. Not sure then what the problem could be.
/D: light on, displayed in the dash, although there are no lights bulbs hooked up in the rear. That could be the problem.
Linear Mode
