5th Generation Maxima (2000-2003)Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
To help get things going, we are starting up a group buy for the first product which will be a 3" MAF Sensor Housing with TIG welded sensor flange and bead rolled tube ends.
We need 25 enthusiasts to commit to make the first batch.
This product will be for those having FI setups and those wanting to make their own CAI or WAI.
What diameter Land Rover MAF? I believe the flange is the same as our new Bosch one we use on some Fords.
Can you PM me a picture?
Brian,
This should help give you an idea.
Land Rover MAF:
00-03 Maxima MAF housing:
Side by side:
If your tube has ID of 3", it appears that the LR MAF is only about 1/8" larger, but I doubt that will really make that big of a difference in the grand scheme of things, especially considering yours will be easier to use. i.e. you wouldn't have to deal with the LR bolt pattern.
If your tube has ID of 3", it appears that the LR MAF is only about 1/8" larger, but I doubt that will really make that big of a difference in the grand scheme of things, especially considering yours will be easier to use. i.e. you wouldn't have to deal with the LR bolt pattern.
If MAF Sensor range needs to be further increased we can certainly step up the ID of the tube to 3.125", 3.25", or 3.50".
Linear Mode
