oil cooler problem
#1
oil cooler problem
i have a problem with my oil cooler. it leaks at idle but not when driving. at idle it leaks a drop every couple 3-5 seconds. i asked parts at the nissan i work at if i could just by the o-ring for it and they cannot because they do not sell it separate. yet the tech i work with says i can by it separate. on the other hand they sell it separate for the 3.5 pathfinder. from the pictures the oil cooler looks completely different. i do not feel like paying 200+ for an oil cooler just so i can get the o-ring.
is there any other 3.5 motor oil cooler o-ring that can work
is there any other 3.5 motor oil cooler o-ring that can work
#3
Originally Posted by NmexMAX
Holy You have 230k miles on an 02 Max?
Are you referring to the inlet near the thermostat? If so, a new thermostat will suffice. I got one for 8 USD from PinnacleNissan.
Are you referring to the inlet near the thermostat? If so, a new thermostat will suffice. I got one for 8 USD from PinnacleNissan.
i have 236000 now
i am talking about where the oil filter goes. the gold looking thing. it is leaking behind it.
how do you load pictures into a thread
#6
Looking through FAST there is no seperate part number for any of the FWD oil cooler gaskets. You CAN buy the 350Z oil cooler gasket seperately however, the 350Z oil cooler has a different oil cooler part number altogether.
#9
Originally Posted by DAVEB
You CAN get the o-ring seperately- I'll be happy to sell you one, or ask your local guys for part # B1304-43U00. It's not in FAST, but any experienced Nissan parts guy should know about it.
i will ask the parts guy for that part number.
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: E-Manage Ultimate and patch cable
knight_yyz
5th Generation Classifieds (2000-2003)
3
10-24-2015 08:05 AM
ag90fox
7th Generation Maxima (2009-2015)
6
09-09-2015 12:22 PM