you still think ebay fstb is just as good as anything else?
08-22-2006, 11:40 PM
#41
Originally Posted by The Law
atleast if your going to talk about the bar put the right name down its FTSB not FSB....FSB stands for Front Sway Bar while FTSB stands for Front Strut Bar
finally you got something right 
08-23-2006, 06:20 AM
#43
Supporting Maxima.org Member
Join Date: Mar 2005
Posts: 180
Originally Posted by The Law
atleast if your going to talk about the bar put the right name down its FTSB not FSB....FSB stands for Front Sway Bar while FTSB stands for Front Strut Bar
Either way you know exactly what I am talking about...it's still a broken piece of pot metal that needs to be replaced with a real FTSB (if you insist).
08-23-2006, 06:28 AM
#44
Originally Posted by bvenvert
Point taken...but I would like to know how Front Strut Bar is abbreviated FTSB and Front Sway Bar is abbreviated FSB? Who came up with this as the abbreviating system for maxima.org mods? Seems to me there is no reason why FTSB could not be the Front Sway Bar and FSB could be the Front Strut Bar. They are both compiled from 3 words so how do you get an additional letter in the Strut Bar?
08-23-2006, 06:35 AM
#45
Supporting Maxima.org Member
Join Date: Mar 2005
Posts: 180
Originally Posted by The Law
atleast if your going to talk about the bar put the right name down its FTSB not FSB....FSB stands for Front Sway Bar while FTSB stands for Front Strut Bar
You're wrong! That's an Infiniti engine! 
08-23-2006, 08:30 AM
#48
Originally Posted by The Law
atleast if your going to talk about the bar put the right name down its FTSB not FSB....FSB stands for Front Sway Bar while FTSB stands for Front Strut Bar
Originally Posted by steven88
finally you got something right
08-23-2006, 08:54 AM
#49
Originally Posted by bvenvert
So what your saying is that The Law had the information incorrect in his post, based on org abbreviations and wanted to flame me on the org with the wrong information, as well.. It should be FTSB not FSTB. Now it is all starting to make sense.
NO, you still have it backwards like THE LAW. It's FSTB which stands for Front Strut Tower Brace. It's a tower brace, not a strut brace. Puppetmaster had it right.
08-23-2006, 09:19 AM
#51
I just installed my used Stillen FSTB, replaced my EBAY one, looks waaay nicer, performance difference?......... NAH, but much better build quality.
I agree, Andrew get the sucker welded! Shouldn't be any more than $10.
I agree, Andrew get the sucker welded! Shouldn't be any more than $10.
09-18-2006, 04:45 PM
#56
Newbie - Just Registered
Join Date: May 2006
Posts: 247
Originally Posted by soonerfan
trying to get that 15 post huh?
how many FSTBs have you actually seen?
how many FSTBs have you actually seen?
09-20-2006, 02:19 PM
#62
Originally Posted by CCS2k1Max
To make the steering feel from the Falken 512s "tighter"??? 
09-20-2006, 02:23 PM
#63
Originally Posted by CCS2k1Max
To make the steering feel from the Falken 512s "tighter"???
09-20-2006, 02:46 PM
#64
Originally Posted by steven88
well...i got it for $12...so i just had to pick it up...i can tell a difference already in cornering...
09-21-2006, 08:32 AM
#65
Originally Posted by steven88
well...i got it for $12...so i just had to pick it up...i can tell a difference already in cornering...
$12!!! If you find somebody selling an Otto RSTB anywhere near that let me know.
09-21-2006, 09:48 AM
#67
Originally Posted by CCS2k1Max
I can't speak for the fleabay FSTBs, but you can feel the Otto does make the front end feel tight.
$12!!! If you find somebody selling an Otto RSTB anywhere near that let me know.
$12!!! If you find somebody selling an Otto RSTB anywhere near that let me know.
the front end does feel tighter during high speed turns! even at low speed (25mph turns in 2nd gear) i can feel somewhat of a difference....but the high speed ones, woohoo!@!
09-21-2006, 01:37 PM
#69
Originally Posted by CCS2k1Max
I$12!!! If you find somebody selling an Otto RSTB anywhere near that let me know.
i have a Pro-1 topspeed RSTB. aka ebay.
09-21-2006, 04:38 PM
#76
Originally Posted by MaxBoost925
good luck finding an Otto RSTB, i dont think they make one.
i have a Pro-1 topspeed RSTB. aka ebay.
i have a Pro-1 topspeed RSTB. aka ebay.
I feel like an a'ss because I could have bought 1 from an org member for $25. I was just too busy at the time (okay, to lazy) to drive out and pick it up. Laziness>me FTL
09-21-2006, 10:25 PM
#77
Originally Posted by illlojik
I feel like an a'ss because I could have bought 1 from an org member for $25. I was just too busy at the time (okay, to lazy) to drive out and pick it up. Laziness>me FTL
btw. HAPPY 1900 POST!!!
10-22-2006, 09:28 AM
#79
Member
Join Date: Sep 2006
Location: berkeley, ca
Posts: 107
i have a ebay, 'white carbon fiber look' aluminum ftsb for $20, no clearance issues with either hood or windshield wiper fluid piping, looks clean & pretty, turn in's quicker and more stable, solid feeling. and like all ftsb, it was easy to install.
go spend an extra $50 if you want, in fact go spend an extra $$$$$$ however much you want if that will make you feel better about your purchase, whos gonna stop you?
imo, 20 bucks for a solid product is allright
thanks to steven88 for his imput and experience the falken 512's, might have to get new tires soon.
go spend an extra $50 if you want, in fact go spend an extra $$$$$$ however much you want if that will make you feel better about your purchase, whos gonna stop you?
imo, 20 bucks for a solid product is allright
thanks to steven88 for his imput and experience the falken 512's, might have to get new tires soon.
10-22-2006, 11:05 AM
#80
You can get an Otto bar here......
http://www.procarparts.com/store-det...=onlinestoreDB
WTF..... I just noticed it is out of stock.
http://www.procarparts.com/store-det...=onlinestoreDB
WTF..... I just noticed it is out of stock.
Thread
Thread Starter
Forum
Replies
Last Post
pkfinn
1st-3rd Generations Classifieds (1981-1994)
2
01-03-2016 02:55 PM
raffivegas
6th Generation Classifieds (2004-2008)
0
08-23-2015 09:54 PM
220k+ A32
5th Generation Maxima (2000-2003)
10
08-17-2015 03:57 PM