5th Gen CF Trunk Project?!?
02-07-2005, 10:56 AM
#82
jose just emailed me back, and said that he can cut those out if i want them. which i definitley do. i dont know if you guys wanna suggest the same things, but i should be sending my money over today! 
02-07-2005, 04:44 PM
#84
Supporting Maxima.org Member
Thread Starter
Join Date: Nov 2000
Posts: 1,275
pay info
Those people that put a $200 deposit down will owe $515. I sent him the liscence plate bracket so he could mold the space for the liscence plate but I dont know if he will make the holes or not. I would assume he would, but when you send your payment I would specifically ask him to cut out the holes.
My car is a show car and a weekend driver so I will have plates on it and I'd like the holes drilled out.
Nilesh... keep your shirt on buddy! I e-mailed Jose in regards to your payment and I'm still waiting for a response. DONT SHOOT THE MESSENGER. If theres nothing to report about the CF Trunk project, you wont see me on here much. But as soon as I know something pertinent, so will you all. Hang tight...
Deac
My car is a show car and a weekend driver so I will have plates on it and I'd like the holes drilled out.
Nilesh... keep your shirt on buddy! I e-mailed Jose in regards to your payment and I'm still waiting for a response. DONT SHOOT THE MESSENGER. If theres nothing to report about the CF Trunk project, you wont see me on here much. But as soon as I know something pertinent, so will you all. Hang tight...
Deac
02-07-2005, 05:08 PM
#85
when i sent the remainder of my payment today, Jose said he would make sure the license plate light holes would be cut out on mine. i dont know if that means you guys have to specify, but just make sure, those who care.
Deac, i dont know how much nilesh would be checking the thread now, but i talked to Jose about the $50, and we didnt really get anywhere on that, so i paid the full remaining $515, he said he never got $50. im gettin outta the middle of that tho.
now i just gotta get really used to the no spoiler look
Deac, i dont know how much nilesh would be checking the thread now, but i talked to Jose about the $50, and we didnt really get anywhere on that, so i paid the full remaining $515, he said he never got $50. im gettin outta the middle of that tho.
now i just gotta get really used to the no spoiler look
02-07-2005, 08:39 PM
#86
Good to see everything is coming together. Deac, you truly are doing a good job continuing this thread and keeping everything updated. I'm sorry for the pseudo-harsh words, its just unnerving to not know whats going on, I'm one who always considered myself in control of my financial situations. KCMC has gotten a response from Jose about the money in question, so it's time to get answers from Jason, I guess.
Once again - good luck with the rest of this deal, hope to see LOTS of pictures. Thanks Deac for organizing, and KCMC for purchasing my spot.
Take care all-
Nilesh
Once again - good luck with the rest of this deal, hope to see LOTS of pictures. Thanks Deac for organizing, and KCMC for purchasing my spot.
Take care all-
Nilesh
02-07-2005, 11:06 PM
#88
Senior Member
Join Date: Aug 2000
Posts: 1,551
as for the 50 dollars....i looked into it also, it never made it to Jose....so I'm guessing the guy that started this kepted it... I can't think of his name at the moment, the 4tth gen guy....name is on the tip of my tongue...
02-08-2005, 08:43 AM
#91
Supporting Maxima.org Member
Thread Starter
Join Date: Nov 2000
Posts: 1,275
You gotta figure...
We all know it will definately be naturally lighter because it Carbon Fiber vs aluminum we're talking about here. If I had to take a guess.... I would say it should be at least 10-15 lbs less.
Deac
Deac
02-10-2005, 09:22 PM
#96
from the email he sent me saturday, he said he had a trunk in the mold now, and one to go in after that. as long as i got him my payment asap, he could get mine in the mold and shipped out early "next week" which would be this coming monday or tuesday i assume. i figure if you get your payment in now, you would be after me.
he also said he would make sure to leave a hole for the stock license plate lights on mine, but im not sure if you want him to do that for you too.
he also said he would make sure to leave a hole for the stock license plate lights on mine, but im not sure if you want him to do that for you too.
02-13-2005, 08:17 PM
#99
Junior Member
Join Date: May 2004
Location: Vernon, CT
Posts: 29
CF trunk
Originally Posted by Deac
ANYWAY.... the people who are in on this deal are people who have the money to spend obviously and typically they already have CF hoods and are trying to do something new, different & innovative... If you cant help or contribute positive feedback, check out another thread. Lets not waste posts with comments that are not going to help us get this project finished. The more people we get, the more the price will go down... I'm cool with it either way which is why I already put my deposit down along w/a few others. Lets get that headcount!
Deac
Deac
02-14-2005, 12:21 AM
#100
Originally Posted by Platinum_Maxima
that's too expensive, just wait VIS Racing is comming out with a 5th gen CF trunk and will be much cheaper than that,prob around $350
and where did you get this information from?
02-14-2005, 05:27 AM
#102
I don't know bout 350 bux for a VIS trunk lid, but I seen a RSX Type S go through the shop last week with a carbon fiber rear door latch. Now on a RSX this is a big door with a window in it, it has a wiper, needs room for the 3rd brake light that is right in the middle. The latch was made by VIS, and the attention to detail was superb. Latch was sooo light that I think it must have shaved ez 75lbs of the back of the RSX. Everything a stock RSX had, this one had- even holes for the plastic clips that hold the interior panels on where there. I'm not so sure bout a CF trunk for my own car as I'm affraid I will do some damage to the lid with my sound system.
02-14-2005, 05:34 AM
#103
i checked around for prices on VIS trunks, and the absoulte cheapest honda trunks i found were $580ish. he said that is what VIS told him, and he was gonna call him today, but i told him the exact same thing, that $350 was extremely low for something with such complexities as a CF trunk.
02-14-2005, 10:43 AM
#104
btw Jose, i just emailed you, but i was wondering what the status was on the trunks in the mold. i know you said there was one that had to go in ahead of mine, so i wanted to see if that one had been taken out yet. let me know, thanks.
02-14-2005, 11:39 PM
#105
well i just sent my paypal earlier in the day.. i hope to receive the hood in a couple of weeks.
I called the # that was supposedly jose's, but it wasn't him. It was some crazy dude that was fckin rude.
I called the # that was supposedly jose's, but it wasn't him. It was some crazy dude that was fckin rude.
02-15-2005, 06:14 AM
#106
Originally Posted by A33 VQ30DEK
well i just sent my paypal earlier in the day.. i hope to receive the hood in a couple of weeks.
I called the # that was supposedly jose's, but it wasn't him. It was some crazy dude that was fckin rude.
I called the # that was supposedly jose's, but it wasn't him. It was some crazy dude that was fckin rude.
im waiting for Jose to get back to me. i checked their website and they said that they are out of the shop when doing custom projects, but try to respond asap. there isnt a phone number listed for some reason, they say their are having problems with phone service. ill email Jose back wednesday if i dont have an answer.
02-15-2005, 08:57 AM
#108
Status update on the trunklids:
This past Thursday my paint guy finally had a chance to come over and spray the trunklids down with an automotive clear coat, the only problem was that the weather was rainy and very humid(we didn't factor this in), and this ruined the clear coat leaving many pinhole sized holes in the finish. I asked him and he said that it's possible to wetsand them and to reapply the clear and that it's going to take him a few days before we know. I am sure that one of the two will be fine after they do that, it wasn't as noticeable, but I don't want to take any chances and will start making a new one today.
Since we urgently want to finish this project, we are going to stop all other work at the shop and focus only on the pending trunklids. By doing this I am sure that we will have some of them finished this week and the rest by this next week.
And to answer some other questions:
djfrestyl: I'm sorry that there was still some confusion about those 50 dlls, I tried to clarify that in my previous post. That money never made it to me, so please talk with the person that you sent it to.
E55AMG2: The weight savings are substantial, this trunklid should only weigh around 12-15 lbs. The stockers are around 40-45 lbs.
Platinum_Maxima: VIS products are inexpensive and not made domestically, but I'm sure that you will never see one for that cheap. On top of that I highly doubt that they will ever come out with any maxima trunk lids, and if they do they would focus on the 4th gen, not the 5th gen.
BlackBIRDVQ: From my experience, I had a 12 inch sub in the back when I was testing the 4th gen trunk lid on my maxima, and I had no rattles and it actually sounded better inside. I don't know how big of a system you have in your max, but if it's something similar to what I had you should be ok.
Ok guys it's time to get to work, I will have an update this weekend with some tracking numbers.
Thanks!
Jose.
This past Thursday my paint guy finally had a chance to come over and spray the trunklids down with an automotive clear coat, the only problem was that the weather was rainy and very humid(we didn't factor this in), and this ruined the clear coat leaving many pinhole sized holes in the finish. I asked him and he said that it's possible to wetsand them and to reapply the clear and that it's going to take him a few days before we know. I am sure that one of the two will be fine after they do that, it wasn't as noticeable, but I don't want to take any chances and will start making a new one today.
Since we urgently want to finish this project, we are going to stop all other work at the shop and focus only on the pending trunklids. By doing this I am sure that we will have some of them finished this week and the rest by this next week.
And to answer some other questions:
djfrestyl: I'm sorry that there was still some confusion about those 50 dlls, I tried to clarify that in my previous post. That money never made it to me, so please talk with the person that you sent it to.
E55AMG2: The weight savings are substantial, this trunklid should only weigh around 12-15 lbs. The stockers are around 40-45 lbs.
Platinum_Maxima: VIS products are inexpensive and not made domestically, but I'm sure that you will never see one for that cheap. On top of that I highly doubt that they will ever come out with any maxima trunk lids, and if they do they would focus on the 4th gen, not the 5th gen.
BlackBIRDVQ: From my experience, I had a 12 inch sub in the back when I was testing the 4th gen trunk lid on my maxima, and I had no rattles and it actually sounded better inside. I don't know how big of a system you have in your max, but if it's something similar to what I had you should be ok.
Ok guys it's time to get to work, I will have an update this weekend with some tracking numbers.
Thanks!
Jose.
02-15-2005, 09:06 AM
#109
Thanks for your update Jose. I got your email as well. I dont mind waiting a few more days to make sure the clearcoat and finish is just right, so no rush. ill sit tight until you send an update this weekend with some tracking info.
02-17-2005, 07:17 AM
#112
Originally Posted by KCMC582
ha, no **** man. i cant wait to see what it looks like with the hood and eyelids and everything. im hopin he is able to get mine out this weekend, that would be great.
02-18-2005, 12:30 PM
#113
hopefully we will be getting some info from Jose today or tomorrow. i hope everything worked out with the clearcoat and everything. it will be nice to get this right before my car comes back from the body shop. 
02-18-2005, 05:32 PM
#114
Senior Member
Join Date: Aug 2000
Posts: 1,551
Originally Posted by KCMC582
hopefully we will be getting some info from Jose today or tomorrow. i hope everything worked out with the clearcoat and everything. it will be nice to get this right before my car comes back from the body shop.
02-18-2005, 05:57 PM
#115
thats happening now. my major "dent" haha is being fixed, the CF hood is goin on, and the lip kit is going on. this will really make the car stand out. its like xmas eve that never ends!
02-18-2005, 07:08 PM
#117
Senior Member
Join Date: Aug 2000
Posts: 1,551
Originally Posted by axotik
I think that is to expensive, if you're willing to work on the price a bit i'd be interested for sure. I live very close to Chula Vista and i'm familar with the area.
02-18-2005, 07:55 PM
#118
Junior Member
Join Date: May 2004
Posts: 76
carbon fiber material
Hmm i'm to lazy to measure the trunk but here are some basic prices on carbon fiber.
Hmm i'm to lazy to measure the trunk but here are some basic prices on carbon fiber.
02-18-2005, 08:33 PM
#119
so an 11" x 32" square of "rigid black sheets" is $279. you figure at the bare minimum, your gonna need 3-4 of those. 3 sheets of that is over $800. expensive? yes this is, but its a custom project, meaning they had to make the mold for these 7 trunks. even the mass produced VIS trunks are goin for just $600 and up, depending on where you look, and those are "mass" produced trunks...
http://www.prostreetonline.com/buy/v...hatches/honda/
of course we are going to semi-justify the fact that we spent this much money on a trunk lid, but based on some of these VIS prices, this, as myktek said, isnt bad for custom work.
http://www.prostreetonline.com/buy/v...hatches/honda/
of course we are going to semi-justify the fact that we spent this much money on a trunk lid, but based on some of these VIS prices, this, as myktek said, isnt bad for custom work.
02-18-2005, 09:05 PM
#120
Senior Member
Join Date: Aug 2000
Posts: 1,551
and plus, those sheet your talking about....aren't what u use to make a cf hood/trunk etc etc....these pieces are already harden, so u cut pieces out of it... like a dash kit....a real cf piece is made by layering pieces into a mold and then applying the resin to it...it's like laying fiberglass....i've done alot of research on cf myself b/c i wanted to make some custom pieces for myself....