ND Parts Car: 03 SE Sunlit Sand (EV0)
#1
4th Gen Parts King
Thread Starter
iTrader: (384)
Join Date: May 2002
Location: Moorhead, MN
Posts: 7,775
Parts Car: 03 SE Sunlit Sand (EV0)
Picked up another 5.5 gen parts car today.
Unlike the last one everything on this car will be available for sale.
The following parts have been SOLD:
12 volt outlet cover
Engine harness
Dash harness
Gas pedal
ECU, Ignition cylinder with key and NATS module
Headlight/Turn signal stalk
Ashtray
Engine cover bolts
MAF sensor W/housing
Headlight wiring (male connectors)
All 4 lock/unlock actuators
Both front speakers
Wheels
Entire exhaust
VIAS solenoid
LF window regulator
Tail lights
All 3 motor mounts and trans mount
Passenger front door
B1 S2 o2 sensor
EVAP Canister
EVAP control system pressure sensor
Vacumm cut valve bypass valve
Driver headlight
Rear sidemarkers
Alternator
Driver side skirt
Steering rack
The following parts were damaged or are no good:
Hood
Both fenders
Front bumper
Grill
AC condenser
Passenger headlight
Both foglights
Airbags
Front seatbelts
Interior carpet
Engine cover
PS reservoir
Headliner
Both fender liners
Unlike the last one everything on this car will be available for sale.
The following parts have been SOLD:
12 volt outlet cover
Engine harness
Dash harness
Gas pedal
ECU, Ignition cylinder with key and NATS module
Headlight/Turn signal stalk
Ashtray
Engine cover bolts
MAF sensor W/housing
Headlight wiring (male connectors)
All 4 lock/unlock actuators
Both front speakers
Wheels
Entire exhaust
VIAS solenoid
LF window regulator
Tail lights
All 3 motor mounts and trans mount
Passenger front door
B1 S2 o2 sensor
EVAP Canister
EVAP control system pressure sensor
Vacumm cut valve bypass valve
Driver headlight
Rear sidemarkers
Alternator
Driver side skirt
Steering rack
The following parts were damaged or are no good:
Hood
Both fenders
Front bumper
Grill
AC condenser
Passenger headlight
Both foglights
Airbags
Front seatbelts
Interior carpet
Engine cover
PS reservoir
Headliner
Both fender liners
Last edited by Maxima_Joe; 02-26-2015 at 12:50 PM.
#10
Thanks man. Yea as long as the sunroof shade is not torn or anything it'll be good for me because its gonna get dyed anyway. I've been looking for those engine splash shields for over a year and it would be **** if you had them!
#13
Hey Joe,
Looking for the 4 hex head bolts that hold the engine cover in place.
Also looking for the CV joint/axle for the passenger side. How is the condition of the one on this car?
Thanks!
Paul
Looking for the 4 hex head bolts that hold the engine cover in place.
Also looking for the CV joint/axle for the passenger side. How is the condition of the one on this car?
Thanks!
Paul
#21
4th Gen Parts King
Thread Starter
iTrader: (384)
Join Date: May 2002
Location: Moorhead, MN
Posts: 7,775
I still have to get back to a few people on the seat motors and the sunroof shade but I haven't had time to get to those items yet.
The entire dash is out and I'll be working on stripping the rest of the interior this week.
The entire dash is out and I'll be working on stripping the rest of the interior this week.
#25
4th Gen Parts King
Thread Starter
iTrader: (384)
Join Date: May 2002
Location: Moorhead, MN
Posts: 7,775
Parts are starting to pile up. Car is almost completely stripped.
I have the exhaust to pull yet and then the engine is ready to come out. After that there's only a few other items left to pull. I'm hoping to finish it up Sunday.
I have the exhaust to pull yet and then the engine is ready to come out. After that there's only a few other items left to pull. I'm hoping to finish it up Sunday.
#35
need this window trim piece from the front passenger side:
Also need the fender liner for the front driver side. Engine splash shields would be a bonus!
Also need the fender liner for the front driver side. Engine splash shields would be a bonus!
Last edited by The Duke of NY; 12-14-2013 at 06:00 PM.