5th Generation Classifieds (2000-2003)Buy, sell, trade parts for 2000-2003 Maximas
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
so it time to leave the maxima scene, which is upsetting. my maxima has been good. but the tranny has gone again and the engine has a lot of miles so im getting a new car. so this is what i have up for sale.
-2000-2001 injen cai -$200
-number 1 catback exhuast -$200 just had install 1 month ago and the car has sat for the last 3 week because a week after it was installed the tranny went.
here is it on with the...
-euro clear taillights - $50
-projection headlights drilled for HIDs -$200
AND
-2002-2003 grille4u upper and lower straight billet grilles- $100
-set of 4 clear side markers - $40
-blue speedo gauges -$50
-dash kit -$10
-wiring harness -$10
-glow shift gauge triple gauge pod - $50
-LeBra 2002-2003 Car Bra - $50
-2000-2001 fog lights - $30
-upper strut tower brace -$50
I'm located in Plymouth Ma pm me for shipping info
Images are located in my album named parts.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
__________________
2000 Nissan Maxima GLE with 58k, Grounding kit, smoked SE tails, strut bar, Warpspeed Y-Pipe, 6000k Bi-Xenon Heads, 5000k HID Fogs, and No SES.
can you help me upload them to this thread cuz idk how to
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
hey sorry guys it has been a monsoon in plymouth the last week i tommorrow look to be sunny so the parts will be coming off and the pictures will be posted. sorry for the delay.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
just got the cat to axle of the exhuast off. i need to figure how to get the axle back part off. i need to lift the rear end up a lot. the pics that i have will be post on this thread shortly.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
And here are the others cuz they wouldnt load think the post was full
-dash kit -$10
-wiring harness -$10
-glow shift gauge triple gauge pod - $50 (includes Factory Pillar so yours wont need to be drilled)
-LeBra 2002-2003 Car Bra - $50
-2000-2001 fog lights - $30
-upper strut tower brace -$50
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
Yes $20 for rear and $20 for the front for anyone that wants them.
also if anyone needs more pictures just let me now i have been working on my new project but are willing to stop and take more pictures of anything anyone is interested in.
Also might be parting out the whole car but will let know later...
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
50 bucks for the gauge pods with or without the gauges, and do you have more pics of the gauges?
__________________
2000 Nissan Maxima GLE with 58k, Grounding kit, smoked SE tails, strut bar, Warpspeed Y-Pipe, 6000k Bi-Xenon Heads, 5000k HID Fogs, and No SES.
50 bucks for the gauge pods with or without the gauges, and do you have more pics of the gauges?
without the gauges. they are maybe going in my new project. but if they dont then the prices of the gauges is as fallow:
Tinted 7 color Air to fuel - $50
Tinted 7 color oil pressure - $45 includes sensor (never had sensor installed)
Tinted 7 color voltmeter - $35
oil filter adapter - $20 (never installed on the car)
also just found:
pioneer 6.5 4 way speakers -$50
Power Acustic 5.25 2 way speakers - $40
also people has been requesting more pictures so here they are...
intake
oil filter adapter and sensor
clear sidemarkers
and here is what i have off of the exhuast so far i need like i tall floor jack and my friend who has one is on vacation and will be back at the end of this week.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
and grilles
upper billet grille
lower billet grille
both grille only fit the 5.5 gen bumper
and another pic of the gauge pod
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
just to make it clear this is not a part out yet im just getting rid of my aftermarket part for now.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
are the gauges included with the guage pad??? any Y-pipe or headers??? or sunroof switch???
__________________
SHIFT_LOTS OF OIL
DCMAX current mods- 4th gen intake, 2.5" custom catback, NWP block off plate, 00SE tailight w/overlays, Rewired fog lights, Eyelid, JIC coilovers, FSTB, 3.0 OBX headers, SSIM...
95 White GXE- 15.1 sold... now 14.9 (car next to me in sig)
00 Sterling GXE- 15.0 (ebay intake, exhaust) my next love and beauty (crashed n sold)
02 Sterling GLE- 13.84@100 2.1'
if anyone wants anything just let me now and i will give you my paypal.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
__________________
2000 Nissan Maxima GLE with 58k, Grounding kit, smoked SE tails, strut bar, Warpspeed Y-Pipe, 6000k Bi-Xenon Heads, 5000k HID Fogs, and No SES.
not a part out? damn man, you could make a killing...i need both front hub assemblies...i live like an hour from you too, not to mention i need a cat possible MAF and battery tie down, what are you doing with the car? if its goin to the junk yard you should at least part it out and make some cash and look at the silver lining lol help a bunch of us orgers out bro
i have to discuss options with my dad considering the car is in his name. He was planning on donating it but i can talk him out of that. i will update you guys on the potential part out later today if not then tomorrow. thanks for looking everyone.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
fogs are oem they fit a 5th gen bumper will not fit a 5.5 gen. also i have decided to part out the car. so every thing must go! The car has no front bumper due to crack, tranny is fried but part from it are good(it doesnt have 3rd or 4th gear), the radiator support is rusted, no a/c condesor, and radiator leaks. but other than that the car is in really good condition. the interior is grey cloth with black leather dash and leather door cards with grey cloth inserts.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
PM's sent...Come on guys and gals i need this stuff gone.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
PMs replied...
I finally got the axle back part of the exhaust off an here are the pics i need this stuff gone.
Here they are....:
^this piece is a pain in the A$$ to remove^
the piping is 2.5 inches and the tip is 4.5 inches
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
still have everything bump...
all shipping quotes have be given out let me know if you want it.
__________________
The maxima is over time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
time for a new project and it is a 1999 GC4 first thing is to make it look like the GC8 then paint and then turbo! but i think i might go turbo first then this thing will be a major sleeper.
Linear Mode
