FS: Cattman B-Pipe, Warpspeed Test Pipe, H-Tech Springs
11-08-2008, 04:39 PM
#1
FS: Cattman B-Pipe, Warpspeed Test Pipe, H-Tech Springs
Thanks for looking.
SOLD - I just took off my Cattman B-pipe before the winter hits and replaced it with my stock one. I'm planning on going Megan, which means I'll be using their B-pipe since they won't let me get just the rear section. What you see at the flanges and partially along the pipe is rust that can be taken off. Remember, this is a stainless steel system so it is just surface rust on the piping. The resonator has a slight rattle and I've been driving with it for a year now. Since the exhaust is off, I'd suggest replacing it before installing it. I'll give the thrush resonator as well... which is perforated and fits the exhaust perfectly.
EDIT: I just notice after taking apart the b-pipe that the rattle is from the broken tack welds that held the perforated resonator. As you can see in the picture, there are only four, all of them broke off... I think a couple easy tack welds will do the job. The other end has a full circular weld around the pipe instead of the tack welds that you see here. It is on the short end of the b-pipe which makes things much easier.
$35 Shipped Brand new Thrush Glasspack
$45 Shipped - Tein H-Tech rear springs. Used for about a week and has a better spring rate for the Maxima than my current progress springs, but it didn't look right with the Progress springs up front.
$25 - Warpspeed Test Pipe. SOLD
$35 Shipped - Stock Rear Shocks. 35k miles. Bought from an org member years ago and never used them.
SOLD - I just took off my Cattman B-pipe before the winter hits and replaced it with my stock one. I'm planning on going Megan, which means I'll be using their B-pipe since they won't let me get just the rear section. What you see at the flanges and partially along the pipe is rust that can be taken off. Remember, this is a stainless steel system so it is just surface rust on the piping. The resonator has a slight rattle and I've been driving with it for a year now. Since the exhaust is off, I'd suggest replacing it before installing it. I'll give the thrush resonator as well... which is perforated and fits the exhaust perfectly.
EDIT: I just notice after taking apart the b-pipe that the rattle is from the broken tack welds that held the perforated resonator. As you can see in the picture, there are only four, all of them broke off... I think a couple easy tack welds will do the job. The other end has a full circular weld around the pipe instead of the tack welds that you see here. It is on the short end of the b-pipe which makes things much easier.
$35 Shipped Brand new Thrush Glasspack
$45 Shipped - Tein H-Tech rear springs. Used for about a week and has a better spring rate for the Maxima than my current progress springs, but it didn't look right with the Progress springs up front.
$25 - Warpspeed Test Pipe. SOLD
$35 Shipped - Stock Rear Shocks. 35k miles. Bought from an org member years ago and never used them.
Last edited by OOmaxSE; 11-13-2008 at 09:23 PM.
11-08-2008, 05:26 PM
#3
great price on the warpspeed test pipe. I have one myself and I put it on when I only had a catback and no headers and let me tell you, the car revved up a bit faster with the test pipe on. I dont care who believes it or not. Youre taking out a huge restriction basically. Great simple mod
11-08-2008, 09:31 PM
#7
Thanks pbn85 for the insight. I had the test pipe on for a while now and I was never disappointed. It's a real test pipe rather than a "resonated test pipe" which make the exhaust sound baffled.
All PM's replied.
11-09-2008, 10:34 AM
#10
Alright, here's the update.
Due to the high traffic in these items, I'm having a hard time telling people to wait because of others saying they will pay but haven't responded back to my PM's. I'm going to go ahead and give the green light to those that are ready to pay. Please do not pay until you have contacted me making sure the item is still available. I gave a couple people my Paypal addy to pay but they haven't done so, so please don't pay until you know it's still available.
All items are still available at this point until further notice. Thanks and this is just a heads up, I can't refund you what Paypal charges to send payment... so let's make this smooth guys!
Thanks, again.
Due to the high traffic in these items, I'm having a hard time telling people to wait because of others saying they will pay but haven't responded back to my PM's. I'm going to go ahead and give the green light to those that are ready to pay. Please do not pay until you have contacted me making sure the item is still available. I gave a couple people my Paypal addy to pay but they haven't done so, so please don't pay until you know it's still available.
All items are still available at this point until further notice. Thanks and this is just a heads up, I can't refund you what Paypal charges to send payment... so let's make this smooth guys!
Thanks, again.
11-11-2008, 11:43 AM
#16
The problem is that the resonator has a slight rattle. And yes the thrush resonator will have to be welded on, not sure if you'd need a mounting plate.
11-11-2008, 02:33 PM
#17
You wouldn't need a mounting plate, you'd just weld it right where the Cattman one is. It's about the same size. It can be welded for $25 at a muffler shop. It will be VERY easy considering it's off also vs it being on the car.
11-13-2008, 08:59 AM
#23
Direct bolt on with PERFECT fitment from Cattman. It is not loud, it gives a nice throaty and aggressive sound while eliminating drone. It is free flowing, you can really tell the difference VS the stock b-pipe. It has less than 15k miles. Btw, if it concerns you, you can really make it look new by using a metal sponge/sandpaper and a metal polisher.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM
rbaker100
8th Generation Maxima (2016-)
4
09-25-2015 07:52 PM