Years of Procrastinated Maintenance.
#1
Years of Procrastinated Maintenance.
Ok so Ive had my maxima since about 2006-2007 and bought it as a shell to swap good parts from my totaled maxima into. Well over the years, the list of things requiring TLC or needing replaced all together has added up and I'd like to start fixing some of them. The car has over 300k miles on the body now and I got 464 hand calculated miles on my last full tank of gas, or about 30.5 miles per gallon. I paid cash for it, insurance is affordable, and its been reliable so I plan on keeping it and fixing some of the issues. Here's a few to get started
Thanks,
Matt
Thanks,
Matt
Last edited by matts95max; 04-22-2014 at 12:04 PM.
#2
http://forums.maxima.org/general-max...tion-sale.html
Last edited by dwapenyi; 04-22-2014 at 12:13 PM.
#4
#5
ok so 5th gen seats avoided. Ill look for i35, 5.5 gen, or 350z. What should I expect to pay for 2 front seats?
Ill check out that permatex defroster line solution, thanks! and I really like the spare tire solution you linked.
Im not looking for more road noise, but am very interested in getting the folding seat back to work properly.
Also, I read that the seats aren't a direct swap and that swapping rails and stuff will be needed. Im OK with that.
Thanks for the input!
Ill check out that permatex defroster line solution, thanks! and I really like the spare tire solution you linked.
Im not looking for more road noise, but am very interested in getting the folding seat back to work properly.
Also, I read that the seats aren't a direct swap and that swapping rails and stuff will be needed. Im OK with that.
Thanks for the input!
#6
ok so 5th gen seats avoided. Ill look for i35, 5.5 gen, or 350z. What should I expect to pay for 2 front seats?
Ill check out that permatex defroster line solution, thanks! and I really like the spare tire solution you linked.
Im not looking for more road noise, but am very interested in getting the folding seat back to work properly.
Also, I read that the seats aren't a direct swap and that swapping rails and stuff will be needed. Im OK with that.
Thanks for the input!
Ill check out that permatex defroster line solution, thanks! and I really like the spare tire solution you linked.
Im not looking for more road noise, but am very interested in getting the folding seat back to work properly.
Also, I read that the seats aren't a direct swap and that swapping rails and stuff will be needed. Im OK with that.
Thanks for the input!
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
JoshG
4th Generation Maxima (1995-1999)
51
09-21-2015 10:41 PM
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM