95 auto Maxima, Two new front CV Axle's
#1
[SOLVED] 95 auto Maxima, Two new front CV Axle's
I installed two new CV axels on my 95 maxima auto. After I installed the two CV axles everything went well. Today after about one block of driving the wheels no longer engage. The RPM's are increasing but the wheels no not respond. Attached is a video of my car parked on the side of a residential road. The street is slight slanted. The video shows my car on starting in "Parked":
https://www.dropbox.com/s/k3wlrtmecv...911_120400.m4v
Any ideas? What I dont understand is that both wheels do not turn. I could understand one not spinning but both?
It is insanely hot at the moment and can not work on the car on the side of the street. Will need to pull it to my house then investigate. Till then any ideas?
https://www.dropbox.com/s/k3wlrtmecv...911_120400.m4v
Any ideas? What I dont understand is that both wheels do not turn. I could understand one not spinning but both?
It is insanely hot at the moment and can not work on the car on the side of the street. Will need to pull it to my house then investigate. Till then any ideas?
Last edited by delacruz_17; 09-11-2012 at 08:52 PM.
#3
I installed two new CV axels on my 95 maxima auto. After I installed the two CV axles everything went well. Today after about one block of driving the wheels no longer engage. The RPM's are increasing but the wheels no not respond. Attached is a video of my car parked on the side of a residential road. The street is slight slanted. The video shows my car on starting in "Parked":
https://www.dropbox.com/s/k3wlrtmecv...911_120400.m4v
Any ideas? What I dont understand is that both wheels do not turn. I could understand one not spinning but both?
It is insanely hot at the moment and can not work on the car on the side of the street. Will need to pull it to my house then investigate. Till then any ideas?
https://www.dropbox.com/s/k3wlrtmecv...911_120400.m4v
Any ideas? What I dont understand is that both wheels do not turn. I could understand one not spinning but both?
It is insanely hot at the moment and can not work on the car on the side of the street. Will need to pull it to my house then investigate. Till then any ideas?
#4
thanks
EDIT:
It looks like autozone gave me the wrong axle.
source
My car has ABS so the above axle will not work.
Looks like I need the 9721 and not the 9721N.
Will update this thread later today with the results.
EDIT 2:
The driver side axle popped out
I replaced it at autozone and installed it everything is now good to go.
PS: Stupid autozone
Last edited by delacruz_17; 09-11-2012 at 08:51 PM. Reason: update #2
Thread
Thread Starter
Forum
Replies
Last Post
kingw323
4th Generation Maxima (1995-1999)
20
10-21-2015 08:36 AM
follyburr
6th Generation Maxima (2004-2008)
1
08-12-2015 10:22 PM