Help with miss.
02-04-2012, 08:13 AM
#1
Help with miss.
Had a hard start in morning, poor acceleration, a miss and low gas mileage. So I had a full induction cleaning system done. Made a huge difference. I just bump the key in the morning and it cranks right up. Going down the road it accelerates good. Still have a miss though. Especially at idle. Had the Idle air control valve cleaned as well. Went this morning and ohm'd the coils. Here are the results any opinion if this can cause the miss?
P1, N2 0 0 0 0 0 0 positive lead pin 1 neg pin 2
N1, P2 1.93 1.95 2.03 2.10 2.22 2.25 Neg pin 1 Pos pin 2
Only codes that pull up are P0440 and P1448
P1, N2 0 0 0 0 0 0 positive lead pin 1 neg pin 2
N1, P2 1.93 1.95 2.03 2.10 2.22 2.25 Neg pin 1 Pos pin 2
Only codes that pull up are P0440 and P1448
Last edited by JEFF6898; 02-04-2012 at 08:41 AM.
Thread
Thread Starter
Forum
Replies
Last Post
gapboi210
3rd Generation Maxima (1989-1994)
10
02-21-2010 02:22 PM
mr300z87
3rd Generation Maxima (1989-1994)
45
02-16-2007 05:44 PM
00GLE
5th Generation Maxima (2000-2003)
9
12-29-2006 04:27 PM