DO NOT Put Tape On Coil Packs
#1
DO NOT Put Tape On Coil Packs
If you have problems with coil packs you will know that a Google search will usually lead to forums that tell you to put electrical tape over your coil's boot and around the coil itself to help insulate it.
So while changing my spark plugs the boot popped off my coil pack and got stuck in my spark plug hole so I fished it out but ended up ripping parts of the boot in several places. I did not want to spend $20 on new coils (You can't buy the boot itself, it comes with the coil) so I cheaped out and wrapped tape over the boot, and it worked for a while but my car started to misfire after a few days. So I decided to put on another layer but when I pulled out the coil pack, the tape was melted to the walls of the hole and the boot got stuck all the way at the bottom.
After 30 minutes of poking at the boot trying to fish it out, I had an epiphany as I was crying in the corner of the garage. And sprayed some WD-40 on the boot and it lubed it up enough to break free from the tape and another hour of fishing ended with SUCCESS!
My car for some reason came with several coil packs already taped over with some magic electrical tape that did not melt, so I took all of it off and whatcha know, I had 2 more cracked boots underneath. So I tried dielectric grease and lathered it on the inside of the boot and the outside filling the cracks and it seems to insulate quite well, I still haven't had any misfires so thats a thing to consider for a temporary fix.
So far I have changed one coil with some brand (BWD?) from O'reily and its been good so far. And for anyone wondering the coil simply pops off the coil pack, you need to hold it at the top boot very firmly and need to pull hard to break it free.
So while changing my spark plugs the boot popped off my coil pack and got stuck in my spark plug hole so I fished it out but ended up ripping parts of the boot in several places. I did not want to spend $20 on new coils (You can't buy the boot itself, it comes with the coil) so I cheaped out and wrapped tape over the boot, and it worked for a while but my car started to misfire after a few days. So I decided to put on another layer but when I pulled out the coil pack, the tape was melted to the walls of the hole and the boot got stuck all the way at the bottom.
After 30 minutes of poking at the boot trying to fish it out, I had an epiphany as I was crying in the corner of the garage. And sprayed some WD-40 on the boot and it lubed it up enough to break free from the tape and another hour of fishing ended with SUCCESS!
My car for some reason came with several coil packs already taped over with some magic electrical tape that did not melt, so I took all of it off and whatcha know, I had 2 more cracked boots underneath. So I tried dielectric grease and lathered it on the inside of the boot and the outside filling the cracks and it seems to insulate quite well, I still haven't had any misfires so thats a thing to consider for a temporary fix.
So far I have changed one coil with some brand (BWD?) from O'reily and its been good so far. And for anyone wondering the coil simply pops off the coil pack, you need to hold it at the top boot very firmly and need to pull hard to break it free.
#7
I do not see a problem with the electrical tape fix as long as you use good electrical tape. Most of the wires in our engine bay are wrapped in electrical tape.
RockAuto is the only place i've seen that sells just the boots so it is understandable to do the cheap fix.
Have I done it? No. Will I do it? No.
RockAuto is the only place i've seen that sells just the boots so it is understandable to do the cheap fix.
Have I done it? No. Will I do it? No.
#8
When changing spark plugs several years ago 2 of the boots seperated on those long firewall sided coils. I put electrical tape over those boots and it held for several years. When I changed plugs earlier this year I removed then replaced that electrical tape. The old tape was not melted and came off easliy.
#9
I do not see a problem with the electrical tape fix as long as you use good electrical tape. Most of the wires in our engine bay are wrapped in electrical tape.
RockAuto is the only place i've seen that sells just the boots so it is understandable to do the cheap fix.
Have I done it? No. Will I do it? No.
RockAuto is the only place i've seen that sells just the boots so it is understandable to do the cheap fix.
Have I done it? No. Will I do it? No.
#11
I have electric tape and mine are fine. Maybe you layered it on too thick? Fixed my problems.
This thread reminds me of the 9007 headlight bulb conversion thread. People were *****ing they're wires burned out/bulbs/melted head lights. Well, ever consider its user error? I have the 9007 conversion also and have had no problems.
This thread reminds me of the 9007 headlight bulb conversion thread. People were *****ing they're wires burned out/bulbs/melted head lights. Well, ever consider its user error? I have the 9007 conversion also and have had no problems.
#12
I think it was the tape that was used. Probably used a cheap brand (never use the colored ones). For anything in the engine bay, I would recommend using Scotch Super 88 electric tape.
#14
Sounds like cheep tape? Today I tried some tape on a Rolls Royce I was working on, plug wire arcing near the dis-cap. I can confirm that cheep tape will not stop the arc if the boot is fairly worn(at least not in this case). Put some HD duck tape over the black tape, and still the arc passed right through. So like the thread says dont use tape, and the point is not to not use tape, but to use it in the proper place. Not down inside our motors I WOULD NEVER, but thats just me.
#15
Its okay Blackwind, I've got it covered haha I replaced all the cracked boots already. But thanks!
As for the tape, I think you guys are right. The tape that I had already on my coils have been on there as long as I remember but they didn't melt.
The tape that I used was from Plymouth thats a good brand right? But either way, from now on I'm going to fix things the right way instead of half-assing things. Which means I will need to re-do my fogs, brakes, and just about every Ebay thing I put on my car....
But seriously, I am not even going to consider sticking anything down that hole that doesn't belong there. (Same goes for future wife) because if it get stuck down that hole, you will kicking yourself in the butt for it. It was a nightmare trying to get the tape off while not breaking the spark plug which is a whole other nightmare (because that means spending more money on a new spark plug). But a super long pair of needle nose pliers and a extra extra long flat head saved the day for me.
As for the tape, I think you guys are right. The tape that I had already on my coils have been on there as long as I remember but they didn't melt.
The tape that I used was from Plymouth thats a good brand right? But either way, from now on I'm going to fix things the right way instead of half-assing things. Which means I will need to re-do my fogs, brakes, and just about every Ebay thing I put on my car....
But seriously, I am not even going to consider sticking anything down that hole that doesn't belong there. (Same goes for future wife) because if it get stuck down that hole, you will kicking yourself in the butt for it. It was a nightmare trying to get the tape off while not breaking the spark plug which is a whole other nightmare (because that means spending more money on a new spark plug). But a super long pair of needle nose pliers and a extra extra long flat head saved the day for me.
Last edited by Leo_Koneval; 12-17-2010 at 07:28 PM.
#16
#18
ok, uh... i put tape on my coils because uhh well, i read a thread on this forum sayin it was a good idea. then i read this one so i took it all back off. when i did this i noticed something odd; 1, the car was exhibiting some sort of weird burning smell (i thought it was oil burning off the headers) 2, when the tape came off it was was no longer soft and stretchy. on the part of the boot where it meets the plug was hard and very brittle in fact to get it off i had to crack it into a million pieces. i agree this is A BAD IDEA. i feel dumb for trying it
Last edited by maxed_out_99; 12-23-2010 at 08:22 AM.
#19
last year i had a coil go bad so i replaced it but the guy at the shop said another one was going bad but i couldnt afford to replace it so he said he could wrap it in some tape to see if it could longer and a year later its still holding up
#20
Yeah mine had some coils already wrapped in a quality tape and it lasted for a loooong time.
But you know, I'm just warning you guys of the potential risk. Especially if it gets stuck all the way at the bottom with the spark plug still in it. Although I'm sure its not as bad as breaking a spark plug while its still threaded.
Just be careful! I'm glad I don't have to change spark plugs again for a loooong time because if I see another coil pack boot, I will probably cry.
But you know, I'm just warning you guys of the potential risk. Especially if it gets stuck all the way at the bottom with the spark plug still in it. Although I'm sure its not as bad as breaking a spark plug while its still threaded.
Just be careful! I'm glad I don't have to change spark plugs again for a loooong time because if I see another coil pack boot, I will probably cry.
#21
I am kinda in the same situation. I changed almost all of them with no problem. However 2 of the boots were stuck on the firewall side the left and right, the middle was fine. How did you end up fishing out the boot? Any suggestions would be great!!!
#24
One of my boots on the firewall side got stuck last month when I was replacing the valve cover gaskets. I tried using extended needle nose pliers but I couldn't get a grip on it. Like maxfever1987 suggested I used a wire hanger to give it some clearance so I could grip it with those pliers.
#25
The answer is dangerously cheap.
I did end up buying new coils for all my coil packs. By the way.
And electrical tape does hold up, it kind of depends on the brand. My car came with a few coils already wrapped in tape for who knows how long and when I saw it I was like "well look at this, this stuff works!" but the brand I used melted.
#28
all coil pack fired cars will eventually have a coilpack crack...plastic+heat/cold expansion over time=cracks...
best way to seal the coilpack= seal the crack/s with superglue ,then 1-2 rounds with GOOD QUALITY high temp electrical tape...you will get many more miles out of a cracked coilpack doing this...
best way to seal the coilpack= seal the crack/s with superglue ,then 1-2 rounds with GOOD QUALITY high temp electrical tape...you will get many more miles out of a cracked coilpack doing this...
Thread
Thread Starter
Forum
Replies
Last Post
ballerchris510
5th Generation Maxima (2000-2003)
6
09-11-2015 05:29 PM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM