Go Back   Maxima Forums > Maxima Discussions > 4th Generation Maxima (1995-1999)

4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Welcome to Maxima.org!
Welcome to Maxima.org,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!


Reply
 
Thread Tools Display Modes
Old 05-27-2009, 08:29 PM   #1
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Will a 98 Maxima trunk fit a 98 i30? Can I retrofit Maxima tail lights onto an i30?

I want to use the G2 euro tail lights on my 98 i30t. If I swap my trunk out for a maxima trunk will the trunk line up correctly and close properly?

Also if I do this, the inner tail lights on the trunk will fit but not the outer lights. Is it possible for a body shop to cut the car up a little to make them fit?
mantis40 is offline   Reply With Quote
Old 05-27-2009, 08:36 PM   #2
Senior Member
 
Join Date: Oct 2008
Location: Knoxville Tn
iTrader: (0)
Posts: 361
probable be easier and look better if you change out the quarter panels entirely but that would be expensive. i'm sure it would probably work but i dont think many people have tried it
__________________

klemenz is offline   Reply With Quote
Old 05-27-2009, 08:46 PM   #3
The Dirty Pearl
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
iTrader: (19)
Posts: 13,346

Quote:
Originally Posted by mantis40 View Post
Is it possible for a body shop to cut the car up a little to make them fit?
Seriously?

If you'd like, your body shop can 'cut the car up a little' to fit the tails from a Bugatti. Or an F430. Or an NSX.

It all depends on your budget.

Is it possible? Extremely.


And if I were you, I would seriously be repairing my trans first, and worrying about 'euro' (read: crap) tail lights later.
__________________
Quote:
Originally Posted by 2damax View Post
This jerk is right so often I just search threads hoping he gets something wrong so I can catch him
Quote:
Originally Posted by kizzmyazz View Post
ok so what i found out is that because of the FMU, i dont need to get injectors because it will neutralize the oil pressure to prevent detotnation
FSMs | A32 CEL Decoder | Howto Videos
pmohr is offline   Reply With Quote
Old 05-27-2009, 08:47 PM   #4
boost me.....
 
96blackmaxSE's Avatar
 
Join Date: Aug 2005
Location: Louisville/Lex-Vegas, KY
iTrader: (25)
Posts: 1,663

Quote:
Originally Posted by mantis40 View Post
I want to use the G2 euro tail lights on my 98 i30t. If I swap my trunk out for a maxima trunk will the trunk line up correctly and close properly?

Also if I do this, the inner tail lights on the trunk will fit but not the outer lights. Is it possible for a body shop to cut the car up a little to make them fit?
umm....no, no and no. just dont do that please....
__________________
SHIFT_SIMPLICITY



FOR SALE: Custom boot/ armrest set: http://forums.maxima.org/4th-generat...stitching.html


"SECURITY" OEM Light:http://forums.maxima.org/4th-generat...led-light.html


00VI'd, Exhaust'd, Dropped, Retrofitted, Rim'd, Carbon fiber hooded, Tint'd, 5spd'd....
96blackmaxSE is offline   Reply With Quote
Old 05-27-2009, 08:48 PM   #5
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by pmohr View Post
Seriously?

If you'd like, your body shop can 'cut the car up a little' to fit the tails from a Bugatti. Or an F430. Or an NSX.

It all depends on your budget.

Is it possible? Extremely.
Ok cool, can you answer my trunk question too?
mantis40 is offline   Reply With Quote
Old 05-27-2009, 08:52 PM   #6
The Dirty Pearl
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
iTrader: (19)
Posts: 13,346

Quote:
Originally Posted by mantis40 View Post
Ok cool, can you answer my trunk question too?
__________________
Quote:
Originally Posted by 2damax View Post
This jerk is right so often I just search threads hoping he gets something wrong so I can catch him
Quote:
Originally Posted by kizzmyazz View Post
ok so what i found out is that because of the FMU, i dont need to get injectors because it will neutralize the oil pressure to prevent detotnation
FSMs | A32 CEL Decoder | Howto Videos
pmohr is offline   Reply With Quote
Old 05-27-2009, 08:55 PM   #7
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by pmohr View Post
Come on, don't make me find out the hard and costly way. I got a trans to fix.
mantis40 is offline   Reply With Quote
Old 05-27-2009, 09:01 PM   #8
boost me.....
 
96blackmaxSE's Avatar
 
Join Date: Aug 2005
Location: Louisville/Lex-Vegas, KY
iTrader: (25)
Posts: 1,663

I told you the best answer....
__________________
SHIFT_SIMPLICITY



FOR SALE: Custom boot/ armrest set: http://forums.maxima.org/4th-generat...stitching.html


"SECURITY" OEM Light:http://forums.maxima.org/4th-generat...led-light.html


00VI'd, Exhaust'd, Dropped, Retrofitted, Rim'd, Carbon fiber hooded, Tint'd, 5spd'd....
96blackmaxSE is offline   Reply With Quote
Old 05-27-2009, 09:03 PM   #9
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by 96blackmaxSE View Post
I told you the best answer....
Ok, the G2's are ugly. Anyway, will a Maxima trunk line up and close properly on an i30 of the same year ?
mantis40 is offline   Reply With Quote
Old 05-27-2009, 09:04 PM   #10
boost me.....
 
96blackmaxSE's Avatar
 
Join Date: Aug 2005
Location: Louisville/Lex-Vegas, KY
iTrader: (25)
Posts: 1,663

no.
__________________
SHIFT_SIMPLICITY



FOR SALE: Custom boot/ armrest set: http://forums.maxima.org/4th-generat...stitching.html


"SECURITY" OEM Light:http://forums.maxima.org/4th-generat...led-light.html


00VI'd, Exhaust'd, Dropped, Retrofitted, Rim'd, Carbon fiber hooded, Tint'd, 5spd'd....
96blackmaxSE is offline   Reply With Quote
Old 05-27-2009, 09:35 PM   #11
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by 96blackmaxSE View Post
no.
Are you just saying that because you dont want me putting g2's on my car because they're ugly?
mantis40 is offline   Reply With Quote
Old 05-27-2009, 09:37 PM   #12
Senior Member
 
Join Date: Dec 2008
Location: RI pawtucket
iTrader: (0)
Posts: 187
Send a message via AIM to 96max3189
no it wont
__________________
96 maxima gle: sold
96 maxima se: sold


96max3189 is offline   Reply With Quote
Old 05-27-2009, 09:51 PM   #13
Senior Member
 
Join Date: Dec 2004
Location: Alexandria, VA, & Central Jersey
iTrader: (5)
Posts: 2,492
Send a message via AIM to ImmaSquashYou
Quote:
Originally Posted by pmohr View Post
Seriously?

If you'd like, your body shop can 'cut the car up a little' to fit the tails from a Bugatti. Or an F430. Or an NSX.

It all depends on your budget.

Is it possible? Extremely.


And if I were you, I would seriously be repairing my trans first, and worrying about 'euro' (read: crap) tail lights later.
Quote:
Originally Posted by mantis40 View Post
Ok cool, can you answer my trunk question too?
Quote:
Originally Posted by pmohr View Post
Quote:
Originally Posted by mantis40 View Post
Come on, don't make me find out the hard and costly way. I got a trans to fix.
Quote:
Originally Posted by mantis40 View Post
Ok, the G2's are ugly. Anyway, will a Maxima trunk line up and close properly on an i30 of the same year ?
Quote:
Originally Posted by mantis40 View Post
Are you just saying that because you dont want me putting g2's on my car because they're ugly?
hahahaha..oh man.....honestly, i don't know what is wrong with you, but it seems like you ask a lot of "weird" questions, and when someone tells you an answer, you dont usually accept it. It seems like you're pulling our leg here and we're on candid camera and you want to see who will get pissed off first. And why did you post in the i30 also?? anyways here is a straight up answer and stop asking after this.

NO, IT WILL NOT FIT. THE REAR PANELS ARE DIFFERENT THEREFORE THE TRUNK LID WILL FIT DIFFERENT. THE ONLY THINGS THAT ARE INTERCHANGEABLE BODY WISE BETWEEN THE I30 AND MAXIMA ARE THE DOORS AND ROOF WITHOUT ANY MODIFICATION.

And why are you trying to hook up a car when you have tranny problems. That's just stupid.
__________________

3 Threads, same question. Good Job Mantis!!
http://forums.maxima.org/infiniti-i3...ights-fit.html
Quote:
Originally Posted by JNCoRacer View Post
Good god, again?

Might I refer you here...http://forums.maxima.org/4th-generat...nto-i30-2.html
Quote:
Originally Posted by mantis40 View Post
OMG THANKS! Looks like some good info there
Quote:
Originally Posted by a33i30 View Post
^You started that thread
ImmaSquashYou is offline   Reply With Quote
Old 05-27-2009, 10:01 PM   #14
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by ImmaSquashYou View Post
hahahaha..oh man.....honestly, i don't know what is wrong with you, but it seems like you ask a lot of "weird" questions, and when someone tells you an answer, you dont usually accept it. It seems like you're pulling our leg here and we're on candid camera and you want to see who will get pissed off first. And why did you post in the i30 also?? anyways here is a straight up answer and stop asking after this.

NO, IT WILL NOT FIT. THE REAR PANELS ARE DIFFERENT THEREFORE THE TRUNK LID WILL FIT DIFFERENT. THE ONLY THINGS THAT ARE INTERCHANGEABLE BODY WISE BETWEEN THE I30 AND MAXIMA ARE THE DOORS AND ROOF WITHOUT ANY MODIFICATION.

And why are you trying to hook up a car when you have tranny problems. That's just stupid.

Wow at least you gave me the answer and the reason why. Well you are gonna hear alot of weird questions from me because i'm young and dumb and do dumb s***. Anyway, i always use the search when I have to.
mantis40 is offline   Reply With Quote
Old 05-28-2009, 07:18 AM   #15
nycnissans
 
secondtonone317's Avatar
 
Join Date: Oct 2006
Location: Queens, NY
iTrader: (7)
Posts: 1,372

Send a message via AIM to secondtonone317
get a maxima trunk and try it out.......maybe you can prove everyone wrong, or not......lol
__________________

Co-Owner and Founder of NYCNissans.com
secondtonone317 is offline   Reply With Quote
Old 05-28-2009, 02:02 PM   #16
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Quote:
Originally Posted by mantis40 View Post
I want to use the G2 euro tail lights on my 98 i30t. If I swap my trunk out for a maxima trunk will the trunk line up correctly and close properly?

Also if I do this, the inner tail lights on the trunk will fit but not the outer lights. Is it possible for a body shop to cut the car up a little to make them fit?
I believe the trunks are interchangeable between all 4th gen I30/Maxi's. I believe the outer taillight openings are the same on the I30 and the Maxi. No "cutting" necessary.

So, yes, I am pretty certain you can easily put a Maxima trunk on your I30 and you can use Maxima taillights.

What are G2 euro tails? Link/pic?
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 05-28-2009, 04:11 PM   #17
Beater
 
Tatanko's Avatar
 
Join Date: Feb 2003
Location: State College, PA
iTrader: (33)
Posts: 7,532

Send a message via AIM to Tatanko
Quote:
Originally Posted by mantis40 View Post
Wow at least you gave me the answer and the reason why. Well you are gonna hear alot of weird questions from me because i'm young and dumb and do dumb s***. Anyway, i always use the search when I have to.
Wouldn't not doing said "dumb s***" be the way to go? If you're dumb and realize you're dumb and continue to make dumb decisions, you might make our heads explode trying to figure it all out.
__________________

SHIFT_obsession
Tatanko's Maxima Site & VQ35DE.com
Tatanko is offline   Reply With Quote
Old 05-28-2009, 08:22 PM   #18
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by Tatanko View Post
Wouldn't not doing said "dumb s***" be the way to go? If you're dumb and realize you're dumb and continue to make dumb decisions, you might make our heads explode trying to figure it all out.
Calm down its just a trunk. Its not like im asking how to install a fake hood scoop.
mantis40 is offline   Reply With Quote
Old 05-28-2009, 11:31 PM   #19
Beater
 
Tatanko's Avatar
 
Join Date: Feb 2003
Location: State College, PA
iTrader: (33)
Posts: 7,532

Send a message via AIM to Tatanko
Quote:
Originally Posted by mantis40 View Post
Calm down its just a trunk. Its not like im asking how to install a fake hood scoop.
I'm as calm as can be Here's my advice: don't do stupid s***.
__________________

SHIFT_obsession
Tatanko's Maxima Site & VQ35DE.com
Tatanko is offline   Reply With Quote
Old 05-29-2009, 12:46 PM   #20
Senior Member
 
Join Date: Apr 2005
Location: SoCal
iTrader: (0)
Posts: 938
Send a message via AIM to 96i30azn
Maybe you can go stalk some dude w/ a maxima and measure the top and bottom width of his trunklid and well as length. they look completely different BTW. my uncle says maxima rear looks like a piece of bread (prebaked) that's been cut. i30 doesn't therefore. it'll look very weird.
96i30azn is offline   Reply With Quote
Old 05-30-2009, 10:43 PM   #21
Senior Member
 
Join Date: Mar 2007
Location: beltsville MD
iTrader: (2)
Posts: 439
Send a message via AIM to JAMAICANLOVRBOY Send a message via Yahoo to JAMAICANLOVRBOY
so you are willing to go thru all the hassle to use G2 euro tailights?., well u can just sell your I30 and get a 98 max, problem solved
__________________

98 gxse, de-k swap, vlsd, apexi II, I/H/E, stillen kit, NEX coilovers

http://boredmder.com/ecucodes/index.php?year=

http://forums.maxima.org/general-max...niti-fsms.html
JAMAICANLOVRBOY is offline   Reply With Quote
Old 05-30-2009, 11:45 PM   #22
Senior Member
 
Join Date: May 2006
Location: Murfreesboro, TN
iTrader: (3)
Posts: 707
Send a message via AIM to tyler5619 Send a message via Yahoo to tyler5619
viewing the trunks on both cars from the side...the maxima trunk is "flatter" and and the i30 trunk has more "curve". to make it fit correctly, you would have to swap the entire rear of the car. maybe a junkyard in your area has it cheaper, but http://forums.maxima.org/4th-generat...w.car-part.com shows the cheapest in my area being $850. that's of course not including those tail lights.

you want a clean looking i30 trunk? shave the tailbar.

/$0.02

EDIT: on second thought...if you swap ONLY the maxima trunk onto an i30 rear, your finished product MAY look something like this:



except the "recessed" part will extend all the way up to the spoiler. your spolier will sit at least ~4" too far towards the front. no spoiler will look just plain dumb.
__________________
SHIFT_no bailout.

A32. QN0. 5MT. FTW.

Current mods.
JVC HU. | 35% tint. | Blackout center caps. | Indy fogs. | Blackout Maxima badge. | Custom blackout SE badge. | Clear bumper lights. | A33 OEM clutch. | HTP MAF adapter, AMSoil cone filter. | NGK Iridium spark plugs. | eBay FSTB. | WarpSpeed y-pipe. | White & bright clock. | Custom 2.5" b-pipe. | Custom G20 sidemarkers. | E46 Bi-X, 6K D2S. | Thrush glasspack. | Magnaflow muffler. | Full tank of 93 octane.


BIRD COUNT: 2.

Last edited by tyler5619; 05-30-2009 at 11:48 PM.
tyler5619 is offline   Reply With Quote
Old 06-01-2009, 01:29 PM   #23
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Could someone answer my question asking what G2 euro taillights are? Thanks.
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 06-01-2009, 01:31 PM   #24
The Dirty Pearl
 
pmohr's Avatar
 
Join Date: Jul 2005
Location: Oak Ridge, TN
iTrader: (19)
Posts: 13,346

Quote:
Originally Posted by ptatohed View Post
Could someone answer my question asking what G2 euro taillights are? Thanks.
Typical altezzas - http://cgi.ebay.com/ebaymotors/97-99...spagenameZWDVW

__________________
Quote:
Originally Posted by 2damax View Post
This jerk is right so often I just search threads hoping he gets something wrong so I can catch him
Quote:
Originally Posted by kizzmyazz View Post
ok so what i found out is that because of the FMU, i dont need to get injectors because it will neutralize the oil pressure to prevent detotnation
FSMs | A32 CEL Decoder | Howto Videos
pmohr is offline   Reply With Quote
Old 06-01-2009, 01:46 PM   #25
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Quote:
Originally Posted by pmohr View Post

Got ya. Thanks. I got all excited by the name, I was picturing diamond red/clear's for the '97-'99 or something like that. Thanks.
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 06-01-2009, 03:16 PM   #26
Senior Member
 
Join Date: Mar 2005
iTrader: (9)
Posts: 1,283
Will it be a bolt on mod: nope
you can make it fit with lots of custom work

97-99 Trunk lid



Infiniti trunk: *grabbed off google images*


custom work to the 1/4 panels will be required to accomodate the new outer tails..
You'll need a new rear bumper too..
looks like the infiniti tail lights "slant" more then the maxima

The maxima tail lights aren't as slim as the I30's...
if it was a simple plug and play, im sure it would've been done already..

Last edited by Digitized; 06-01-2009 at 03:25 PM.
Digitized is offline   Reply With Quote
Old 06-01-2009, 06:48 PM   #27
Former Vendor
 
Join Date: Nov 2002
Location: Houston, TX
iTrader: (42)
Posts: 5,434
Send a message via AIM to BLACKonBLACK98
it'd be easier to swap an i30 front on a maxima body than a maxima rear on an i30 body. as a bonus you could buy a car with a working tranny.
BLACKonBLACK98 is offline   Reply With Quote
Old 06-01-2009, 08:51 PM   #28
G-string Money Tight.
 
JNCoRacer's Avatar
 
Join Date: May 2003
Location: Garland, TX
iTrader: (0)
Posts: 1,516

Send a message via AIM to JNCoRacer
I have both cars. I can tell you it wont fit.

And I'm not going to put forth the effort to swap trunk lids to prove this point.

Like BlackonBlack98 said, it's easier to swap fronts.
__________________

DNE VP
www.nissans.org
JNCoRacer is offline   Reply With Quote
Old 06-01-2009, 08:55 PM   #29
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Can anyone prove that a '95-'99 Maxima trunk won't fit on a '96-'99 I30? And that the outer taillights are not a direct swap? I am the only one on here saying it will work. I feel like everyone saying that it won't work doesn't know for absolute sure and they are just 'guessing'.
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 06-01-2009, 08:57 PM   #30
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
lol i cant believe this dumb thread is still going. Anyway, idc about the G2's anymore, im just disappointed that theres no custom i30 tails, because the stupid inner tail lights are connected as 1 big piece. whatever though, ill live.
mantis40 is offline   Reply With Quote
Old 06-01-2009, 09:13 PM   #31
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Quote:
Originally Posted by mantis40 View Post
lol i cant believe this dumb thread is still going. Anyway, idc about the G2's anymore, im just disappointed that theres no custom i30 tails, because the stupid inner tail lights are connected as 1 big piece. whatever though, ill live.
You're welcome.
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 06-01-2009, 09:32 PM   #32
G-string Money Tight.
 
JNCoRacer's Avatar
 
Join Date: May 2003
Location: Garland, TX
iTrader: (0)
Posts: 1,516

Send a message via AIM to JNCoRacer
Quote:
Originally Posted by ptatohed View Post
Can anyone prove that a '95-'99 Maxima trunk won't fit on a '96-'99 I30? And that the outer taillights are not a direct swap? I am the only one on here saying it will work. I feel like everyone saying that it won't work doesn't know for absolute sure and they are just 'guessing'.
What makes you think it will work?
__________________

DNE VP
www.nissans.org
JNCoRacer is offline   Reply With Quote
Old 06-01-2009, 10:51 PM   #33
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

Quote:
Originally Posted by JNCoRacer View Post
What makes you think it will work?
The bodies are nearly identical with only minor changes. Nissan would not design two different trunk openings. It wouldn't be cost effective. Sure, the trunk designs are different, but the opening and connection points are the same. They look similar enough visually - both the trunk and the outer taillights. I'd be willing to bet a Maxima trunk will fit right on an I30 and the outer taillights will fit right in.
__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions
ptatohed is offline   Reply With Quote
Old 06-02-2009, 12:20 AM   #34
Senior Member
 
Join Date: Mar 2007
iTrader: (5)
Posts: 516
Quote:
Originally Posted by ptatohed View Post
The bodies are nearly identical with only minor changes.
The rear quarters are majorly different between I30 and Max,
__________________
1997 Maxima SE
Pearl White/Black Leather
2004 VQ35DE Full Swap
2004 4AT Full Swap
2004 Infiniti I35 Leather Swap
2004 I35 Cluster Swap
Gen 5.5 Brakes
Completely stock looking
(快速的汽车)
made in china is offline   Reply With Quote
Old 06-02-2009, 12:25 AM   #35
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by ptatohed View Post
The bodies are nearly identical with only minor changes. Nissan would not design two different trunk openings. It wouldn't be cost effective. Sure, the trunk designs are different, but the opening and connection points are the same. They look similar enough visually - both the trunk and the outer taillights. I'd be willing to bet a Maxima trunk will fit right on an I30 and the outer taillights will fit right in.
Outer tail lights are totally different in shape.
mantis40 is offline   Reply With Quote
Old 06-02-2009, 12:40 AM   #36
Senior Member
 
Join Date: Mar 2005
iTrader: (9)
Posts: 1,283
Quote:
Originally Posted by ptatohed View Post
The bodies are nearly identical with only minor changes. Nissan would not design two different trunk openings. It wouldn't be cost effective. Sure, the trunk designs are different, but the opening and connection points are the same. They look similar enough visually - both the trunk and the outer taillights. I'd be willing to bet a Maxima trunk will fit right on an I30 and the outer taillights will fit right in.
Visually doesn't mean anything..

I was looking into swapping body panel parts from the i30 to my maxima awhile back.. the front clip is easy whereas the back is a little more difficult..

and a few years ago, I owned a 1994 honda accord and I swapped the front to look like the 1996-1997 front since 1994-1995 and 1996-1997 bumpers,front grill, tail lights and trunk are different.

Visually, the back seemed should be plug and play..
it was not the case.. tail lights do not bolt up directly and trunk arm designs are different..

but, if you want, prove us wrong and go ahead and do the swap..
Digitized is offline   Reply With Quote
Old 06-02-2009, 09:05 AM   #37
Former Vendor
 
Join Date: Nov 2002
Location: Houston, TX
iTrader: (42)
Posts: 5,434
Send a message via AIM to BLACKonBLACK98
Quote:
Originally Posted by ptatohed View Post
The bodies are nearly identical with only minor changes. Nissan would not design two different trunk openings. It wouldn't be cost effective. Sure, the trunk designs are different, but the opening and connection points are the same. They look similar enough visually - both the trunk and the outer taillights. I'd be willing to bet a Maxima trunk will fit right on an I30 and the outer taillights will fit right in.
i agree that the trunk has a good chance of fitting, or at least close to it, but i gaurentee the outer tails will not.

anyways, horrible idea... for less work you could do the brougham cefiro tails/panel, spend your effort removing the plate box from the bumper, and actually upgrade the appearance.
BLACKonBLACK98 is offline   Reply With Quote
Old 06-02-2009, 10:27 AM   #38
Banned
 
Join Date: Oct 2008
Location: Long Island
iTrader: (3)
Posts: 147
Send a message via AIM to mantis40
Quote:
Originally Posted by BLACKonBLACK98 View Post
i agree that the trunk has a good chance of fitting, or at least close to it, but i gaurentee the outer tails will not.

anyways, horrible idea... for less work you could do the brougham cefiro tails/panel, spend your effort removing the plate box from the bumper, and actually upgrade the appearance.
I don't think its a HORRIBLE idea... everyone in the I30 section agree that the I30 has a better front end (hood, front bumper, fogs, ect) and the Maxima has a better back end (rear bumper, trunk, tail lights).
mantis40 is offline   Reply With Quote
Old 06-02-2009, 02:21 PM   #39
Licensed to Spell
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
iTrader: (7)
Posts: 4,308

You guys are right. I see that now. The outermost, lower portion of the I30 outer taillights are rounded, the Maxima's are pointed.


__________________
Cleaning up the .org's grammar, one member at a time.


1999 SE, Pearl White/Black leather - Fully loaded with all factory options except TC (ABS, heated seats, side airbags, etc.) - Supercharged (322 HP / 307 TQ)

1996 GLE, Pearl/Black - Superchargerless

1993 SHO, Pearl White/Gray - Stock



Super Charger install instructions

Last edited by ptatohed; 06-02-2009 at 02:26 PM.
ptatohed is offline   Reply With Quote
Old 06-02-2009, 08:27 PM   #40
Senior Member
 
Join Date: May 2006
Location: Murfreesboro, TN
iTrader: (3)
Posts: 707
Send a message via AIM to tyler5619 Send a message via Yahoo to tyler5619
you want your own thread to be locked? rofl.

like i said, you could probably shave that tail bar.

OR, if you wanna be REALLY cool, swap THESE in!!!!



i like that a whole lot, but you would have 2 license plate spots, at least until you Bondo.
__________________
SHIFT_no bailout.

A32. QN0. 5MT. FTW.

Current mods.
JVC HU. | 35% tint. | Blackout center caps. | Indy fogs. | Blackout Maxima badge. | Custom blackout SE badge. | Clear bumper lights. | A33 OEM clutch. | HTP MAF adapter, AMSoil cone filter. | NGK Iridium spark plugs. | eBay FSTB. | WarpSpeed y-pipe. | White & bright clock. | Custom 2.5" b-pipe. | Custom G20 sidemarkers. | E46 Bi-X, 6K D2S. | Thrush glasspack. | Magnaflow muffler. | Full tank of 93 octane.


BIRD COUNT: 2.
tyler5619 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
All times are GMT -7. The time now is 02:59 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0 RC7
Maxima.org Forums Home Here you can view your subscribed threads, work with private messages and edit your profile and preferences Frequently Asked Questions on the Forums Search Find other members Registration is free! Support Maxima.org! Receive perks and benefits by donating to Maxima.org Questions? Comments?  Suggestions? Contact Us! Visit our Sponsors View and submit Maxima events Log Out of Maxima.org